Tapping and chipping hammer BMH 45-XE

Name: Tapping and chipping hammer BMH 45-XE
Brand: Würth
SKU: 07025571
Price: 1051.65 EUR
Availability: InStock

Hammer drill/chipping hammer, BMH 45-XE, low-vib.
HAMDRLCHPNGHAM-EL-(BMH 45-XE)
MASTER

Art.-no. 07025571

EAN 4053479221502

All versions

Specification

Powerful and anti-vibration 8-kg hammer drill/chipping hammer with SDS-max drive arbour.

Comfortable working

No need to hold switch continually during prolonged chiselling work.

Adjustable drilling and impact power

The power can be reduced or increased by simply turning the electronic adjusting wheel.

Indication of malfunctions

The service LED indicates malfunctions and an imminent carbon brush replacement.

Rapid drilling progress and extremely smooth running

The anti-vibration system protects the user's joints. Shorter drilling times with high impact power.

Low-fatigue work

The 12 lockable chisel settings allow adjustment to any working angle.

3-year Würth power tool guarantee on wear and tear damages.

The guarantee is subject to the current terms and conditions, which must be followed.

3 Years Warranty on manufacturing and material defects

Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.

Technical information

Nominal voltage	230 V/AC
Frequency	50 Hz
Protection class	Protection class II/protective insulation
Power input	1500 W
Power output	810 W
Min./max. idle speed	0-305 rpm
Min./max. impact rate	1380-2760 rpm
Tool holding device	Suitable for SDS-max
Impact energy	12.5 J
Min./max. drilling diameter in concrete	12-45 mm
Min./max. recommended drilling range for optimum performance (in concrete)	20-40 mm
Max. drilling diameter of breakthrough drill in concrete	80 mm
Max. drilling capacity (volume) in concrete per minute	221 cm³
Max. chiselling power in concrete	250 kg/h
Max. drilling diameter of hollow drill bit in masonry	125 mm
Weight of machine	8.9 kg
Cable length	4 m

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents (1)

Operation manual 1

Delivery scope

Tapping and chipping hammer BMH 45-XE including:

1 x

Handle

SP-AUXILIARY HANDLE

Art.-no. 0708557092

Quantity: 1 x

1 x

Maintenance spray

MAINTSPR-CONCENTRATE-100ML

Art.-no. 0893051702

Description:

100 ml

For lubricating hinges, tool mounts and machine mounts

Quantity: 1 x

1 x

Machine case

SP-CASE

Art.-no. 0955702557

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Accessory

Additional accessory:

Product

Description

Quantity

PU

Price
/PU

Point chisel with SDS-max drive arbour

PTCHIS-MAX-L400MM

Art.-no. 06470400

For general demolition and breaking-through work

x 1 pcs

Flat chisel with SDS-max drive arbor

FLCHIS-MAX-L400-W25MM

Art.-no. 0647040025

Round shaft for general demolition and break-through work

x 1 pcs

Hammer drill bit Max Quadro-S

DRL-HAM-MAX-QUADRO-S-4SPRL-12/340/200

Art.-no. 0647701234

Strong hammer drill bit with X-shaped head geometry and four-spiral feed helix for fast drilling speed with significantly smoother running and greater precision in comparison with conventional drill bits featuring a head with two cutting edges

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).