Collated nails and gas cartridge NG CS-2/3 HD
Collated nails and gas cartridge NG CS-2/3 HD
NL-(DIGA CS2/3)-PWR-FUELCELL-HD-20MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
iBMB MPA TU Braunschweig
MPA BS no.: 2101-126-16-CM:
Expert report on the fire behaviour of light dividers made from plasterboard in accordance with DIN 4102-4
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
On concrete substrate (standard concrete ≥ C 20/25 ≤ C 40/50) in accordance with DIN EN 206 and solid-brick masonry
Material of nail | Steel |
Surface | Zinc plated |
Length of nail | 20 mm |
Diameter of nail | 3.7 mm |
Head diameter | 6.3 mm |
Number of nails | 800 PCS |
Contents | 80 ml |
Container | Cartridge |
Datasheets (0)
Collated nails and gas cartridge NG CS-2/3 HFB
Collated nails and gas cartridge NG CS-2/3
Gas cartridge For DIGA® CS-2 POWER
W-RO 13 round plate
Collated nails and gas cartridge NG CS-2/3 HFBX Suitable for DIGA CS-2 Power and DIGA CS-3 Power
Adhesive nail A2 stainless steel, collated
High-performance gas unit DIGA® CS-3
Securing shackle W-GFIXB 927
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Collated nails and gas cartridge NG CS-2
Collated nails and gas cartridge NG CS-2 HFB
Collated nails and gas cartridge NG CSM-1
Cable bracket W-KBB 935 plus Suitable for all Würth DIGA® CS devices
Collated nails and gas cartridge NG CSM-1 SLB Suitable * for DIGA CSM-1
Collated nails and gas cartridge NG CSM-1 HFB Suitable * for DIGA CSM-1
Cable tie KBL 1 made of polyamide with plastic tongue
Male thread plug-in nipple
Plastic multi-purpose Zebra Shark® anchor without collar
PVC pneumatic hose
E 6.3 TX bit (1/4 inch) E 6.3 (1/4 inch)
Pneumatic air push-in tip
Pneumatic cleaning gun TOP Gun
Plus Quadro-L Vario hammer drill bit
Hose clamp with asymmetrical lock
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, plain
1/2" socket wrench insert metric, bi-hex, short
Cutting disc Speed for steel
Fabric adhesive tape
Twist drill bit HSS DIN 338 type RN 118°
Nylon abrasive grit 100 Coarse A
DIGA® CS-3 high-performance gas-powered tool electrical set
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Gas cartridge For DIGA® CS-2 POWER
High-performance gas unit DIGA® CS-3
W-RO 13 round plate
W-RO 25 round plate
W-RO 36 round plate
Securing shackle W-GFIXB 927
Securing shackle W-GFIXBK 929
Plastic-coated assembly tape
Fabric mounting tape For indoor and outdoor use
Flexible electrical conduit WFKuS-EM-F-105-H0 ComfortXQ® With high-glide inner coating
Cable dispenser XB500
Unwinding rails WS900
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
DIGA® CS-3 high-performance gas device electrical set
FLEXEN® compact eccentric block
Manual drive-in stud With large collar
Club hammer
Plastic pipe cutters
FLEXEN® PE, stable
FLEXEN® PE protective hose
FLEXEN® fleece protective hose B2
Fabric adhesive tape
Blade, smooth
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Plastic-coated punched mounting strip
FLEXEN® pipe insulation S2
