90° push-in elbow For Alu-Steck-WES aluminium pipe
90 degree elbow for aluminium pipe
BOW-F.CND-90D-ALU-(PLG-WES)-EN20
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- Very good corrosion resistance
- Low weight
- With sleeves moulded on both sides, meaning no additional insertion sleeves are required
VDE 0605 and DIN EN 61386-21
Suitable for pipe (EN) | EN 20 |
Classification code for electrical conduit | 4456 |
Load force at 5 cm | 1250 N |
Impact resistance at 300 mm | 2 kg |
Min./max. temperature conditions | -45 to 250 °C |
Material | Aluminium |
Surface | Plain |
Flame-retardant | Yes |
Halogen-free | Yes |
Datasheets (0)
Certificates/ Documents (1)
Services und Systeme rund ums Produkt
Rigid aluminium pipe Alu-Steck-WES
Sleeve connector For Alu-Steck-WES aluminium pipe
Aluminium clip
Plastic end grommet For rigid electrical conduits
Cable and pipe spacer clip with longitudinal hole
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Cable tie KBL 1 made of polyamide with plastic tongue
Pipe spacer clip, aluminium
Clip, metric
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
90° push-in elbow For Stapa-Steck-WESF steel-armoured pipe
Rigid aluminium pipe Alu-Gewinde-WES
90° threaded elbow For Alu-Gewinde-WES aluminium pipe
Rigid steel-armoured pipe hot-dip galvanised, Stapa-Steck-WESF For indoor and outdoor use
Cable gland, polyamide Metric according to EN 60423/EN 62444
Electrical insulating tape
Plastic multi-purpose anchor SHARK® Pro
Plastic multi-purpose Zebra Shark® anchor without collar
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Plus Quadro-L Vario hammer drill bit
Refuse bag Without pull tie
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
ASSY® 4 PH fittings screw Steel zinc plated full thread pan head
Flat washer For hexagon head bolts and nuts
Stud screw Zinc-plated steel
VDE junction box W12
VDE junction box WFK 1 With self-sealing, soft membrane entry points
Plasterboard plug W-GS Type ZD made from die-cast zinc
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Cable tie KBL 1 made of polyamide with plastic tongue
Stud screw Zinc-plated steel
Cable tie KBL 2 made of polyamide with plastic tongue, black
Edge clip With integrated metal clip
TIPP® Smartlock GS pipe clamp
ELMO® connection terminal, screwless, Compact Plus
Wire end ferrule with plastic sleeve
Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
Insulated corrugated pipe
Fire protection foam Kombi
Pipe cable lug with inspection hole
Compression cable lug DIN 46235
Clip, metric
Aluminium clip
Cable and pipe spacer clip with longitudinal hole
Pipe spacer clip, aluminium
Line routing duct, LFK
End piece For LFK cable routing conduit
Spacer sleeve Hexagon, zinc-plated steel
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
Rigid aluminium pipe Alu-Steck-WES
Sleeve connector For Alu-Steck-WES aluminium pipe
Cable dispenser KAW 1
Cable dispenser XB500
Polyester coils, 5.3 mm, wound 3-way twisted with Powerglider
Cable feed device CPS 3
Cordless drill driver ABS 12 COMPACT M-CUBE
Insulation anchor SHARK® ISO
Plastic multi-purpose anchor SHARK® Pro
