FLEXEN® packing wool
FLEXEN packing wool
PCKWOL-10KG
FLEXEN
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- Specially suited for sealing pipes subject to thermal change and mechanical
- motion
- A1 non-flammable in accordance with DIN 4102
- Temperature application range up to +800 °C
- Melting temperature from +1,000 °C
For use in system [D2]+[G] +[J]
- Intumescent cable insulation [D2]
- Pipe partition E [G]
- Joint system E [J]
- For non-combustible, water- and sewage-bearing pipes
- For insulating heating water and utility water pipes, solar installations, hot water and steam pipes
- For sealing fire-retardant glass
Material | Mineral wool |
Building material class/conditions | A1 - Non-flammable / in accordance with DIN 4102 |
Min. melting temperature | 1000 °C |
Conditions for melting point | in accordance with DIN 4102 |
Max. temperature conditions | 800 °C |
Free of halogenated blowing agents (< 0.1 %) | Yes |
Free of hexabromocyclododecane (< 0.1 %) | Yes |
SVHC according to REACH < 0.1 % | Yes |
Free of chlorinated paraffins (< 0.1 %) | Yes |
Free of boron tris-(2-carboxyethyl)-phosphine (< 0.1 %) | Yes |
Free of polybrominated diphenyl ethers (< 0.1 %) | Yes |
Free of polybrominated biphenyls (< 0.1 %) | Yes |
Free of boron compounds (< 0.1 %) | Yes |
Free of lead (< 0.1 %) | Yes |
Free of tin (< 0.1 %) | Yes |
Datasheets (0)
Certificates/ Documents (3)
Services und Systeme rund ums Produkt
Fire-retardant filler
ROCKWOOL Klimarock With mesh-reinforced laminated foil
Elastic fire protection silicone (B1)
Fire partition marking plate for cables and electrical lines
Fire-retardant mortar
ROCKWOOL 800
Mineral fibreboard With intumescent coating
PVC sheathing system
Neutral silicone Perfect
Fire protection foam Kombi
FLEXEN® rock wool
Assembly set For intumescent pipe partition
Pipe sleeve type RK I
Twist drill bit HSS DIN 338 type RN 130°
Assembly set For soft bulk head combi
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Painter's acrylic
Refuse bag Without pull tie
Plastic frame anchor SHARK® UR Zinc-plated steel
Plus Quadro-L hammer drill bit
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
PURlogic® Top single-component gun foam
Amo® III 7.5 type 2 window frame screw Cylinder head 8.0 mm
Amo® III 7.5 type 3 window frame screw Half round head
Silicone spray
PU foam cleaner PURlogic® Clean
pias® drilling screw, flat head with AW drive
VARIFIX® c-assembly rail 41/22
Maintenance spray
Snap-off blade
Fire-retardant filler
Painters' spatula Made of flexible, high-quality steel (taper ground)
Winding wire For wrapping mineral wool insulation and intumescent strips to meet fire protection requirements
Cartridge gun
Fire protection fabric DBU 1.5
Assembly set For intumescent pipe partition
Fire partition marking plate for cables and electrical lines
Pipe sleeve type RK I
FLEXEN® fleece protective hose, drain pipe
FLEXEN® PE protective hose
Assembly set For RK I/RK I Plus pipe collars
Pipe sleeve type RK I
MG III fire protection cement
Fire partition marking plate for cables and electrical lines
W-DN 2 ceiling nail
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Concrete screw with pan head W-BS/S
