Roof hooks adjustable 3-ways Aluminium
Roof hook, aluminium, 7 mm hole in base
ROOFHOK-ALU-ADJ-CLMP35X7-PL100X95MM
ZEBRA
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
Low weight
Flexible thanks to the possibility of height/lateral adjustments
- Variable rib height in roof batten area
- Lateral adjustment in roof batten area
- Height adjustment in rail area: Up to 20 mm
Fluting on bar
Optimum positive and non-positive fit
Entirely pre-assembled
Mounting rail 39x37, 47 x 37 and 60 x 37 can be attached to the roof hook without any preliminary work
Maximum load values without using the roof tile as support
- Pressure parallel to roof surface: 0.7 kN
- Pressure perpendicular to roof surface: 1.5 kN
- Tensile force perpendicular to roof surface: -1.5 kN
We recommend using three DIN 571 wood screws, 6 x 100 mm, A2 stainless steel, or alternatively three ASSY pan head wood screws, 6 x 80 mm or 6 x 100 mm, A2 stainless steel, to attach each roof hook to the rafters. Please observe edge and axial clearances in accordance with general technical approval.
Standard DIN 1052 or the applicable general technical approval must be complied with when attaching all roof hooks. If counter battens etc. are present, the screws must be extended by the corresponding thickness.
Datasheets(X)
Base hole diameter | 7 mm |
Material | Aluminium |
Baseplate length | 100 mm |
Adjustment range | 65 mm |
Product weight (per item) | 479.850 g |
Bar height | 45 - 60 mm |
Required number of wood screws | 3 PCS |
Material number | Aluminium, EN-AW-6082 T6 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!