For detailed information, other images and documents, please select individual articles from the following table.
Nail UNS 104 In accordance with DIN EN 206
Universal nail with washer for concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60)
- Material of nail: Steel
- Surface of the nail: Zinc plated
- Material of washer: Steel
- Surface of the washer: Zinc plated
- Washer thickness: 2 mm
- Shank diameter: 3.7 mm
- Washer diameter: 23 mm
- Head diameter: 8 mm
- Suitable for device type: Würth BST 350, Hilti DX 2, Hilti DX A41, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5
- show more ... show less ...
Register now and access more than 125,000 products
Variants
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Cartridge KFTZ 11A CE With 10 cartridges per magazine strip
Nail HN 101 For use in steel and concrete substrates
Nail HNS 103/18 In accordance with DIN EN 206
Bracket clamp, single
Sneaker bamboo socks three pack
Pin driver BST 350
Nail HNS 107/30 In accordance with DIN EN 206
5-pack of bamboo socks
PVC packing tape
Serrated locking nut A2 stainless steel, plain
Collated nail UMA 221/10
Round-head nail NK 700 With steel washer
Bolt M8 BFB 8 BFB 8 DIN EN 206
Wire nail DIN 1151, steel, plain
Steel nail with riveted washer and discontinuous longitudinal corrugation
Flat blade fuse ATO ISO 8820-3
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Paint spray, high gloss
1/2 inch socket wrench insert, metric
Bond + Seal structural adhesive
Silicone acetate bathroom unit
DUO-S impact drill bit with straight shank
Neutral silicone Perfect
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Thin-walled heat-shrink hose Without internal adhesive
Road marker
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Rust stop primer
1/2" socket wrench insert For TX screws, short
Hand tap set HSS, DIN 352 3 pieces
High-performance gas unit DIGA® CS-3
VARIFIX® c-assembly rail 41/41
Bolt M8 BFS 8 For steel substructures
Bolt M8 BFB 8 BFB 8 DIN EN 206
Step nail W-PNS
Stop drill bit W-BPN 4.8
Threaded step nail W-PN G8
Securing shackle FIXB 127 With pre-assembled 27 mm nail type HN 101
Double securing shackle FIXB 227 With pre-assembled 27 mm nail type HN 101
Cartridge KFTZ 11A CE With 10 cartridges per magazine strip
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Gas cartridge For DIGA® CS-2 POWER
Plastic-coated punched mounting strip
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
FLEXEN® cold rubber Plus S3 continuous insulation boards, self adhesive
Concrete screw W-BS Compact type P with pan head
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
