pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
pias W-214 steel zinc plated hexagon head
SCR-DBIT-HEX-FLG-WS5,5-(A3K)-3,5X9,5
ZEBRA PIAS
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
Reduction of the assembly time using the drill bit tip by min. 50%:
- Drilling without centrepunching
- Thread moulding
- Securing
All in one operation
Suitable for component combinations tI/tII according to approval ETA-10/0184
- Steel/steel for ∅ 4.2 mm-6.3 mm
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Zinc-plated drilling screws may only be used where dampness is not to be expected. For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
 | |
Standards | CS |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Hexagon |
Thread type | Self-tapping screw thread |
Shape of tip | Drilling tip |
Underground | Steel, Aluminum |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 9.5 mm |
Head diameter (dk) | 8.3 mm |
Head height (k1) | 3.45 mm |
Drill tip length (lp) | 3.25 mm |
Screw-thread length with drill tip | 6 mm |
External drive (s1) | WS5.5 |
Max. material thickness to be drilled through (metal) | 2.5 mm |
For max. substructure thickness | 1.5 mm |
Min./max. attachment thickness | 1.5-6.5 mm |
Min./max. recommended installation speed (idling) | 1700-2500 rpm |
Datasheets (0)
Certificates/
Documents
Services und Systeme rund ums Produkt
pias® drilling screw, flat head with AW drive
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Drilling screw, hexagon head with sealing washer pias®
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Wood screw Hexagon head DIN 571, steel zinc-plated blue
pias® drilling screw, countersunk head with AW drive
pias® drilling screw, round head with collar and AW drive
Flat washer For hexagon head bolts and nuts
1/4-inch socket wrench insert hexagon, with magnet
Drilling screw, hexagon head with collar and slot pias®
Blind rivet, flat head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Cable tie KBL 1 made of polyamide with plastic tongue
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
ASSY® 3.0 zinc-plated blue chipboard screw
Stud screw Zinc-plated steel
Plastic multi-purpose Zebra Shark® anchor without collar
Spacer sleeve Hexagon, zinc-plated steel
Twist drill bit HSS DIN 338 type RN 118°
Nylon anchor For light loads (secondary attachments)
WÜPOFAST® zinc-plated blue chipboard screw
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
ASSY® 3.0 zinc-plated yellow chipboard screw
Fabric adhesive tape
Fixanchor W-FAZ/S
Drop-in anchor W-ED/S
Thin sheet metal screw Savetix® with hexagon socket
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Clamp washer
Clamp washer
TX screwdriver assortment with hole
Allen key set, hexagon socket 9 pieces
Mechanic's glove
Blind rivet attachment For processing aluminium, steel and stainless steel blind rivets 2.4-5.0 mm in diameter
Edge protection profile
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Thin sheet metal screw Savetix® with hexagon socket
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Wedge lock washer, W.TEC series, wide shape
Hose clamp Rapid includes quick-release closure
Threaded rod with trapezoidal thread WN 976 with trapezoidal thread in accordance with DIN 103
Threaded rod, left-hand thread DIN 976-1 (shape A), zinc-plated steel 8.8, blue passivated (A2K)
TIME-SERT® thread repair assortment 70 pieces
