Rust stop primer

Name: Rust stop primer
Brand: Würth
SKU: 08932101

Primer Rust-Stop spray can
PRIM-ROSTSTOP-WHITE-GREY-FAST-400ML

Art.-no. 08932101

EAN 4046778395821

All versions

Specification

Active corrosion protection and primer for metal surfaces

Good adhesive properties on a wide variety of surfaces, including in conjunction with PU and MS polymer sealing compounds

Good adhesive properties to aluminium, bare and galvanised metal sheets, steel, old paint etc.

Quick drying, depending on coat thickness, can be painted in approx. 10–15 minutes

Temperature resistant up to 80°C, briefly up to 140°C

Easy to sand

Lower solvent content

Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)

Notice

After use, turn the can upside down and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Vehicle construction, ship building, metal and steel construction, tool manufacturing, bridge building, tank construction, pipeline construction, container construction, agriculture and forestry, municipal management, construction machinery etc.

Instructions

The surface must be clean, dry and free from grease. Remove loose rust, paint and dirt using a wire brush, scraper or similar tool. Lightly sand problematic surfaces. Shake can well before use. Apply a thin coat for the first spray coating. Observe the flash-off time. Drying time 25 minutes, can be painted after approx. 10–15 minutes with all commercially available 1-component, 2-component and water-based top-coat paint systems.

Technical information

Contents	400 ml
Chemical basis	Epoxy resin
Colour	White grey
Drying time	25 min
Density	0.83 g/cm³
VOC concentration (CH)	83.5 %
Shelf life from production	24 Month

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (1)

Safety data sheet

Certificates/ Documents (4)

product declaration 1

product declaration 2

Technical data sheet 1

Technical data sheet 2

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Silicone remover

SILREM-AEROSOLCAN-600ML

Art.-no. 0893222600

For professional cleaning and degreasing before applying adhesives or painting

Tex-Rein cleaning cloth

CLNCLTH-(TEX-REIN)-27X38CM-150PCS

Art.-no. 0899810

Extra fine cleaning cloth for dust and lint-sensitive areas

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).