ELMO® VDE potential equalization rail
ELMO VDE equipotential busbar
EQUIPOTLBUSB-VDE-DIN/VDE0618
ELMO
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Connection options:
- 1 strap 30x4 mm or 1 round conductor 8-10 mm
- 1 round conductor 50 mm2
- 1 round conductor 2.5-6 mm
2 - 6 round conductor 6-25 mm
2
Time needed to connect the conductor reduced to 20%
Clamps are open on delivery
Cover swings in both directions and can be locked open at an angle of 60° or 120°
In accordance with VDE 0618 part 1, VDE 0100 part 540, for potential equalization in accordance with VDE 0190
For indoor use
Min./max. wire cross section | 6-25 mm² |
Number of connections | 9 PCS |
Material of contact bar | Brass |
Material of top section | Polypropylene, highly impact-resistant |
Material of bottom section | Polypropylene, highly impact-resistant |
Min. wire cross section | 6 mm² |
Max. wire cross section | 25 mm² |
Datasheets (0)
Certificates/ Documents (0)
Potential equalization rail For indoor use
Clip, metric
Cable tie KBL 1 made of polyamide with plastic tongue
Earthing strap clamp
ELMO® connection terminal, screwless, compact For single-wire rigid copper conductors
Bathroom earthing rail with cover
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Electrical insulating tape
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Cavity wall device connection box
Device screw
Safety and warning sign — dangerous electrical voltage
Earthing strap clamp, stainless steel In accordance with DIN VDE 0100 and DIN VDE 0190
VDE junction box WMini
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
VDE junction box W12
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
ELMO® device screw
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Nail plate Rectangular design, 34 x 27 mm
pias® drilling screw, flat head with AW drive
Grounding contact plug For cables up to 3G 2.5 mm²
Multi-range clamp
Cable gland, polyamide Metric according to EN 60423/EN 62444
Twist drill bit HSS DIN 338 type RN 118°
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
VDE junction box W16
Wago screwless connection terminal For all types of copper wire
Cable clamp type H
Flat washer For hexagon head bolts and nuts
Professional multi-purpose measuring pliers
Earthing strap clamp
Earthing strap clamp, stainless steel In accordance with DIN VDE 0100 and DIN VDE 0190
Potential equalization rail For indoor use
Bathroom earthing rail with cover
Bathroom earth terminal For one conductor
Earth pipe clamp, copper For conductor cross-sections up to max. 16 mm²
Cross-connector With intermediate plate in accordance with DIN 48845
Terminal For cross-earther
Cross earth rod With connecting lug
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Plus Quadro-L hammer drill bit
HSS AlTiN SMART STEP stepped twist drill bit
Acrylic Special
HIGH TACK SMP adhesive
Earthing strap clamp
Cable clamp type H
Perforated profile rail For type H cable clamp
Bracket clamp
Clip, metric
Aluminium clip
Cable holder
Cable holder
All-rounder multiple cable holder
ELMO® cable tidy holder
Window sill duct, FB
Line routing duct, LFK
Separating rail for centre separation
Device mounting box For BR 80 wall ducts and FB windowsill ducts
Device mounting box For BR 80 wall ducts and FB windowsill ducts
VDE junction box W12
Rigid steel-armoured pipe zinc-plated Stapa-Steck-WESV For indoor use (low-corrosion environments)
Plastic end grommet For rigid electrical conduits
Rigid aluminium pipe Alu-Steck-WES
ELMO® AP damp-room universal switch Off/changeover switch including lighting
Nail anchor SHARK® Hammer TYPE FK
Fixanchor W-FAZ/S
Concrete screw with hexagon head W-BS/S
