Diamond cutting disc Longlife & Speed 3D Extreme

Name: Diamond cutting disc Longlife & Speed 3D Extreme
Brand: Würth
SKU: 5526663230

Diamond cutting disc LS Bau 3D-Extreme ang. gr.
CUTDISC-DIA-LS-3D-EX-CNST-BR22,23-D230MM
ZEBRA

Art.-no. 5526663230

EAN 4053479618265

All versions

Specification

Yellow for construction sites. For angle grinders. With outstanding cutting properties for all construction trades thanks to innovative 3D technology.

3D technology

Special arrangement of the diamonds for outstanding cutting properties

Protection against undercut — especially when working with particularly abrasive materials

Thanks to 3 special protective segments with a height of 15 mm.

3x more cutting edges when compared with similar cutting discs

Thanks to a new segment shape (short tooth technology).

Optimised cooling

Special cooling openings with an "arrow arrangement" provide additional cooling and serve as a captive running direction indicator.

Advantages for the user

Extremely low vibration

Extremely clean cutting edges

An extremely low amount of friction, resulting in low heat generation

Extremely quiet-running

Extremely accurate

An extremely low amount of undercut

Extremely quick

Notice

Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds

If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts

Separate larger workpiece cross-sections into several sections (swing cut)

Work without applying pressure — the weight of the machine is sufficient. Increased pressure causes increased wear.

Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!

Despite the level of safety offered by the tool, always wear protective goggles and clothing while working

Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions

The direction arrow on the disc must match the machine's direction of rotation

Must not be used for lateral grinding

Use the appropriate protective hood

Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)

If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury

Application

Application area

For dry and wet cutting. Specially designed for particularly hard materials that tend to cause other discs to "burn".

Frequent applications

Old concrete/concrete, exposed aggregate concrete, reinforced concrete, concrete tiles/pan tiles, concrete bricks/pipes, sand-lime brick, granite/marble, marble, stoneware. Cast-iron pipes, clinker bricks, glazed pan tiles, hard Poroton, mortar/plaster etc.

Technical information

Versatility (points system)	3 of 4 points
Service life (points system)	4 of 4 points
Cutting speed (point system)	4 of 4 points
Cut quality (point system)	4 of 4 points
Diameter (Ø)	230 mm
Drill hole	22.23 mm
Number of segments x segment height	12 x 12 mm
Number of segments x segment height 2	3 x 15 mm
Segment thickness	2.6 mm
Segment connection	Laser
Max. rotation speed	6600 rpm
Max. circumferential speed	80 m/s