Collated nails and gas cartridge NG CS-2/3 HFB
Collated nails and gas cartridge NG CS-2/3 HFB
NL-(DIGA CS2/3)-FUELCELL-HSCONC-32MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Above 22 mm length:
European technical assessment ETA-21/0702
iBMB MPA TU Braunschweig
MPA BS no.: 2101-126-16-CM
Expert report on the fire behaviour of lightweight dividers made from plasterboard in accordance with DIN 4102-4
MPA BS no.: 2100-376-17-CM
Expert report on the fire behaviour of dividers with double-sided planking made of plasterboard in accordance with DIN EN 520 or DIN 18180 and a substructure in accordance with DIN 18182-1 in conjunction with mounting on solid components
- Fastening of profiles in dry walling
- Attachment on concrete substrate (normal concrete ≥ C 20/25 ≤ C 40/50) according to DIN EN 206, steel and masonry made of solid bricks in the installation area, dry walling
Material of nail | Steel |
Surface | Zinc plated |
Length of nail | 32 mm |
Diameter of nail | 3 mm |
Head diameter | 6.3 mm |
Number of nails | 800 PCS |
Contents | 80 ml |
Container | Cartridge |
Datasheets (0)
Certificates/
Documents
Collated nails and gas cartridge NG CS-2/3
Plastic-coated assembly tape
Dry wall screw with double-start thread
Plastic-coated punched mounting strip
Gas cartridge For DIGA® CS-2 POWER
1/2 inch impact socket wrench insert hexagon, metric, short
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
High-performance gas unit DIGA® CS-3
Collated nails and gas cartridge NG CS-2/3 HFBX Suitable for DIGA CS-2 Power and DIGA CS-3 Power
Collated nails and gas cartridge NG CS-2/3 HD
Securing shackle W-GFIXB 927
Multiple cable holder W-KSH 935 plus
Nail plate Rectangular design, 34 x 27 mm
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Plus Quadro-L Vario hammer drill bit
Refuse bag Without pull tie
Partition wall tape B1
Stud screw Zinc-plated steel
Neutral silicone Perfect
Electrical insulating tape
Cable bracket W-KBB 935 plus Suitable for all Würth DIGA® CS devices
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Empty tool case
Cockpit cleaning and care spray
High Power battery
Plus Quadro-L hammer drill bit
Mechanic's glove
ASSY® 3.0 zinc-plated blue chipboard screw
High-performance gas unit DIGA® CS-3
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Gas cartridge For DIGA® CS-2 POWER
Thread hanger W-GWA Suitable for all DIGA® CS devices
Securing shackle W-GFIXB 927
Double securing shackle W-GFIXBD 927 Suitable for all Würth DIGA® CS tools
Securing shackle W-GFIXBK 929
Plastic-coated assembly tape
Fabric mounting tape for interior use rust-proof, no sharp edges
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
FLEXEN® pipe insulation S2 2 m section
Plastic multi-purpose anchor SHARK® Pro
Window sill duct, FB
High-performance gas unit DIGA® CS-3
Bracket clamp
Flush-mounted fixing clip
Flush-mounted fixing clamp
Anchor plug
Clip, metric
Clip, metric
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
ELMO® AP damp-room universal switch/socket, vertical
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
High-performance gas unit DIGA® CS-3
Stud screw Zinc-plated steel
C 6.3 TX bit (1/4 inch)
Bit box, size 3 33 pieces
Ideal snips
Pin driver BST 350
Cartridge KFTZ 11A CE With 10 cartridges per magazine strip
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Gas cartridge For DIGA® CS-2 POWER
Thread hanger W-GWA Suitable for all DIGA® CS devices
Collated nails and gas cartridge NG CS-2/3
Plastic-coated assembly tape
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
Plastic multi-purpose anchor SHARK® Pro
