Clip, metric
Clip, metric
CLIP-CLAMP-M-PLA-EN20
ELMO
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- Longitudinal hole for lateral alignment during assembly using chipboard screws or nail anchors
- Centre marker for exact alignment of clips
- EN16-EN40: For insertion in profile rails with 11 mm slot width
- Special side reinforcement for increased break resistance
- Made in Germany
- EN16–EN40
For nail anchors ∅ 5 mm, can be screwed onto M6 threaded bolts (e.g. support clip SCZ)
- EN50-EN63
For nail anchor ∅ 6 mm
ETA-18/0957 in conjunction with ETA-12/0452
For surface laying of rigid plastic pipes W-IS-EL-F, WPKu-EM-F and WPKu-EM-F-H0
Nominal size | 20 |
With connection mechanism (vertical) | Yes |
Elongated hole length | 12 mm |
Elongated hole width | 4.4 mm |
Min./max. temperature resistance | -40 to 80 °C |
Colour | Light grey, similar to RAL 7035 |
Material | PP - Polypropylene |
Halogen-free | Yes |
Silicone-free | Yes |
Datasheets (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Services und Systeme rund ums Produkt
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Cable tie KBL 1 made of polyamide with plastic tongue
Electrical insulating tape
VDE junction box W12
Nail plate Rectangular design, 34 x 27 mm
Nylon anchor For light loads (secondary attachments)
Multi-range clamp
ELMO® connection terminal, screwless, compact For single-wire rigid copper conductors
Plastic end grommet For rigid electrical conduits
Cable and pipe spacer clip with longitudinal hole
Cable gland, polyamide Metric according to EN 60423/EN 62444
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Plastic multi-purpose Zebra Shark® anchor without collar
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Rigid electrical conduit W-IS-EL-F With moulded sleeve on one side
pias® drilling screw, flat head with AW drive
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
VDE junction box WMini
Cavity wall device connection box
ASSY® 4 PH fittings screw Steel zinc plated full thread pan head
WÜPOFAST® zinc-plated blue chipboard screw
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Flexible electrical conduit WBY-EL-F ComfortXQ® With high-glide inner coating
Plasterboard plug W-GS Type ZD made from die-cast zinc
Counter nut, polyamide Metric according to EN 60423
Wago Micro push-wire connector, screwless
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 118°
Neutral silicone Perfect
Wago screwless connection terminal For all types of copper wire
Hole Fixing For cable tie gun
Cable tie KBL 1 made of polyamide with plastic tongue
Wago screwless connection terminal For all types of copper wire
ELMO® connection terminal, screwless, compact For single-wire rigid copper conductors
Wire end ferrule with plastic sleeve box type 2
VDE screwdriver set, slotted/PH recessed head 5 pieces
VDE electrical installation pliers, IEC 60900
Crimping tool For uninsulated connectors
Voltage tester Test Plus
Multi-Tester Pro II LED two-pin voltage tester
Silicone spray
Cable gland, polyamide PG
Line routing duct, LFK
Electrical insulating tape set
Rigid aluminium pipe Alu-Steck-WES
Screwless Mini Plus ELMO® connector
Bracket, double-tabbed For empty pipes
Wire stripping pliers, adjustable
Stripping tool AM 130 PLUS
Plastic pipe cutters
Folding rule fibreglass-reinforced
Aluminium standing ladder with steps Riveted
Drill hole marker For marking where access is restricted
Aluminium clip
Cable and pipe spacer clip with longitudinal hole
VDE junction box W12
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Rigid steel-armoured pipe zinc-plated Stapa-Steck-WESV For indoor use (low-corrosion environments)
Rigid steel-armoured pipe zinc-plated Stapa-Steck-WESV For indoor use (low-corrosion environments)
Plastic end grommet For rigid electrical conduits
Rigid steel-armoured pipe hot-dip galvanised, Stapa-Gewinde-WESF For indoor and outdoor use
Cross-line laser CLG 18
Plastic multi-purpose anchor SHARK® Pro
Nail plate Rectangular design, 34 x 27 mm
Multi-range clamp
MFD-S straight shank multi-purpose drill bit cassette 7 pieces
Club hammer
VARIFIX® c-assembly rail 41/41
VARIFIX® bracket 26/18 Zinc-plated steel
VARIFIX® heavy-duty bracket
Suction bell
CEE combo wall socket 250/400 V, 6 H
Cable and pipe spacer clip with longitudinal hole
Line routing duct, LFK
Window sill duct, FB
VDE junction box Q12 With external fastening tabs (cross hole and slotted hole for subsequent corrections)
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Rigid aluminium pipe Alu-Steck-WES
Rigid steel-armoured pipe hot-dip galvanised, Stapa-Steck-WESF For indoor and outdoor use
ELMO® AP damp room earthing contact plug socket With combination lock
AP damp-room series switch
AP damp-room heating emergency stop switch Off/2-pin
AP damp-room grounding contact outlet Without lock
Cordless hammer drill H 28-MA vibration-dampened
Fixanchor W-FAZ/S
