Cable gland, polyamide Metric according to EN 60423/EN 62444
Cable gland, metric EN 60423
CBLGLND-POLYAMIDE-LIGHTGRAY-M20X1,5-EURO
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- Integrated strain relief
- Large sealing and clamping range
- Easy to install
- Made in Germany
 | |
Colour | Light grey RAL 7035 |
Connection thread | M20 x 1.5 |
Min./max. cable diameter | 8-13 mm |
Thread length (metric thread) | 8 mm |
Width across flats (SW) | 24 mm |
Length | 36 mm |
Min./max. temperature conditions | -20 to 100 °C |
IP protection class | IP 68 |
Max. pressure | 5 bar |
Material | PA 6 V-2 - Polyamide |
Halogen-free | Yes |
Silicone-free | Yes |
Material of sealing ring | Polychloroprene nitrile rubber CR/NBR, halogenic |
Datasheets (0)
Certificates/ Documents (1)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Services und Systeme rund ums Produkt
Counter nut, polyamide Metric according to EN 60423
Cable tie KBL 1 made of polyamide with plastic tongue
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Locking screw, polyamide Metric according to EN 60423
Reducer, polyamide Metric according to EN 60423
Clip, metric
Counter nut, brass Metric according to EN 60423
Electrical insulating tape
Cable gland, brass Metric according to EN 60423/EN 62444
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Self-sealing cable grommet, polyethylene Metric according to EN 60423
Crimp cable lug, ring shape Polyamide insulated
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Cable gland
Pipe cable lug with inspection hole
Flat washer For hexagon head bolts and nuts
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
DUO wire end ferrule With plastic sleeve
pias® drilling screw, flat head with AW drive
Twist drill bit HSS DIN 338 type RN 118°
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Thin-walled heat-shrink hose Without internal adhesive
Edge protection profile
Wiring duct, VKW, standard With predetermined breaking points on the bars
Cable tie KBL 1 made of polyamide with plastic tongue
Self-adhesive base
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
1/4 inch bit holder, magnetic
Phillips and slotted bit, plus/minus
Cordless screwdriver S 3-A
VDE cable shears with dual blade
Mitre snips For straight and 45° cuts
Wrapping hose, standard
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Thin-walled heat-shrink hose Without internal adhesive
Insulated corrugated pipe, slit
Blind rivet, large flat head
Blind rivet attachment For processing aluminium, steel and stainless steel blind rivets 2.4-5.0 mm in diameter
Edge protection profile
Grommet plate
Counter nut, polyamide Metric according to EN 60423
Steel spacer stud
Cable clamp type H
Perforated profile rail For type H cable clamp
Wiring duct, VKW DIN
Expanding rivet
Top-hat/support rail
Cordless drill driver ABS 12 COMPACT M-CUBE
Hot air blower HLG 2300-E POWER
