For detailed information, other images and documents, please select individual articles from the following table.
1/4 inch bit holder, magnetic
Bit holder with one-handed quick-change function
- Drive: 1/4 inch
- Drive type: Hexagon
- Tip size: 1/4 inch
- Tip type: Hexagon socket
- Sleeve diameter: 10.5 mm
Register now and access more than 125,000 products
Variants
Very rapid and simple bit replacement
One-hand quick-change function: Pressing lightly on the knob to shoot the bit forwards.
Access deep and hard-to-reach screw heads
Very slim design (∅ max. 10.5 mm)
For bits with hexagon head drive to DIN 3126
Services und Systeme rund ums Produkt
Universal holder C 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
Bit holder E 6.3 (1/4 inch) With stainless steel sleeve and snap ring
C 6.3 TX bit (1/4 inch)
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Bit set with metal belt clip 17 pieces
Connector DIN 7428 E 6.3 (1/4 inch)
1/4-inch socket wrench insert hexagon, with magnet
Snap-off blade
Bit box, size 3 33 pieces
C 6.3 PH bit (1/4 inch)
Universal holder, magnetic With quick-change chuck and permanent magnet
1/4 inch bit holder, E 6.3 Magnetic
Magnetic bit holder
2C cutter knife with slider
Twist drill bit HSS DIN 338 type RN 130°
Plus Quadro-L Vario hammer drill bit
Refuse bag Without pull tie
VDE screwdriver, flat slotted
E 6.3 TX bit (1/4 inch) E 6.3 (1/4 inch)
High Power battery
Twist drill bit HSS DIN 338 type RN 118°
Fabric adhesive tape
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Cable tie KBL 1 made of polyamide with plastic tongue
C 6.3 PZ bit (1/4 inch)
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Flat washer For hexagon head bolts and nuts
Twist drill bit HSS DIN 340 type RN 130°
Hose clamp with asymmetrical lock
Wiring duct, VKW, standard With predetermined breaking points on the bars
Cable tie KBL 1 made of polyamide with plastic tongue
Self-adhesive base
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Phillips and slotted bit, plus/minus
Cordless screwdriver S 3-A
VDE cable shears with dual blade
Mitre snips For straight and 45° cuts
Wrapping hose, standard
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Thin-walled heat-shrink hose Without internal adhesive
Insulated corrugated pipe, slit
Blind rivet, large flat head
Blind rivet attachment For processing aluminium, steel and stainless steel blind rivets 2.4-5.0 mm in diameter
Edge protection profile
Grommet plate
Cable gland, polyamide Metric according to EN 60423/EN 62444
Counter nut, polyamide Metric according to EN 60423
Steel spacer stud
Cable clamp type H
Perforated profile rail For type H cable clamp
Wiring duct, VKW DIN
Expanding rivet
Top-hat/support rail
Cordless drill driver ABS 12 COMPACT M-CUBE
Hot air blower HLG 2300-E POWER
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
