2C cartridge foam PURlogic® Sprint
2C cartridge foam PURLOGIC Sprint
DRFRMFM-2C-PURLOGIC-SPRINT-CART-210ML
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Very quick to reach final strength
Reduces expansion time to 20 minutes. This saves time and costs
Good adhesive properties
Adheres well to various wall joint and frame materials
Dimensionally stable foam
- No pressing during and after the hardening phase
- < 5% dimensional change, tested in accordance with ift directive from the ift Rosenheim Institute in Germany.
For installing wooden and steel door frames
Tested in accordance with ift directive from ift Rosenheim in Germany.
General test certificate from construction authorities
Corresponds to building material class B2 in accordance with DIN 4102, Part 1, tested by MPA Hanover in Germany.
High compressive load
Uniform, fine-celled foam structure
High degree of emptying
Resistant to ageing
Adheres to concrete, stone, hard PVC, metal and wood. Does not adhere to polyethylene, silicone, PTFE and grease. Primer should be used for porous and absorbent substrates. Store upright cartridges in a cool, dry and frost-protected place. Protect from heating up to over +30°C.
At higher temperatures, the storage time is reduced.
One cartridge is sufficient for 6 mounting points, this is the quantity for a door frame, step or window sill of size 1000 mm x 300 mm. Immediately remove any fresh flecks of foam with PURlogic® Clean. Hardened foam can only be removed mechanically.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
For high-quality and secure installation of wooden and steel door frames, steps in staircases and window sills (lining must be used to protect against excessive compressive load). Sand beige colour provides visual confirmation of installation. Adheres to concrete, stone, hard PVC, metal and wood
Align door frames using installation aids:
Door frames and masonry must be load-bearing, clean and free from oils, grease and dust.
Insert the enclosed cardboard strips at the mounting points. Also use extension tube for narrow and deep joints. The mixing tube should be removed after using the foam or when you need to interrupt work. Immediately remove fresh splashes of foam with PURlogic® Clean, art. no. 0892 160. Pretreat plaster and aerated concrete with primer.
Bonding stairs:
Align components such as steps, door sills or window sills to spacers. The spacer is designed to produce an expansion joint of 5-15 mm. It is possible to apply adhesive in two ways, depending on the component size and the conditions:
- 1 Remove the component already aligned. Apply adhesive strands lengthways or crosswise at a spacing of 8-10 cm. Re-position the component immediately on the spacer. Use 2 weights per 15 kg for each spacer.
- Insert the adhesive strands into the expansion joint between the component and surface lengthways or crosswise at a spacing of 8-10 cm. For instance components such as steps, window sills or door sills, use 2 weights per 15 kg per spacer.
- Hardened expansion adhesive can be cut after 8-10 minutes.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Services und Systeme rund ums Produkt
2C foam gun PURlogic® Twinpress
2C frame foam PURlogic® Turbo
PURlogic® Fast 2-component frame foam
PURlogic® Top single-component gun foam
Mixing tube For PURLOGIC® Sprint and PURLOGIC® Turbo 2C cartridge foam
PU foam cleaner PURlogic® Clean
Neutral silicone Perfect
Painter's acrylic
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
VKP® PLUS sealing tape
Multi high-strength adhesive
ASSY® 3.0 zinc-plated blue chipboard screw
1C assembly foam PURlogic® Easy
1C foam gun PURlogic® Xpress For professional application of 1-component gun foams
Silicone acetate bathroom unit
Amo® III 7.5 type 2 window frame screw Cylinder head 8.0 mm
PUR glue in dosing system, transparent
ASSY® 3.0 zinc-plated yellow chipboard screw
PVC packing tape
Snap-off blade
Twist drill bit HSS DIN 338 type RN 118°
C 6.3 TX bit (1/4 inch)
Amo® III 7.5 type 3 window frame screw Half round head
Neutral silicone
Glazing packer
Textured acrylic
Refuse bag Without pull tie
Lining tape
Crepe masking tape
Dry wall screw with double-start thread
Door frame clamp
Doorstop, type D
Stainless steel security door fitting S 505
NP profile double cylinder In 6-pin system
Pull handle ST/A110
A 105 door handle
Lock piece For multiple locks with 2 bolts/2 power wedges or 2/4 bolts
Central locking plate for recessing
Multi-point lock with two bolts and two power wedges
Mounting kit for stainless steel pull handle, type A/wood/plastic
2C frame foam PURlogic® Turbo
