Varioprimer safe + easy

Name: Varioprimer safe + easy
Brand: Würth
SKU: 0890024010

Varioprimer safe + easy
PRIM-WNDWADH-(VARIOPRIM-S/E)-10ML

Art.-no. 0890024010

EAN 4046778559674

All versions

Specification

Multi-purpose surface pre-treatment agent for all common substrates found in replacement glazing

4-in-1 system

Adhesion agent

Corrosion protection

Activator

Protects the adhesive from UV radiation

Black, moisture-hardening primer for promoting adhesion of the window adhesive on glass, ceramic screen printing, lacquer and various metals

Corrosion protection for plain metal surfaces

Activator for trimming (remaining bead) and PU/PVC pre-coated windows

Notice

Shake the container before using the Varioprimer. Do not use the primer if it has gelled. Once opened, use as quickly as possible. When used on translucent surfaces such as windscreens without screen-printed edge, UV protection for the adhesive surface (to protect the primer) is mandatory.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Primer for promoting adhesion of the window adhesive on glass, ceramic silkscreen printing, lacquer and various metals. The primer provides corrosion protection for bare metals and acts as an activator for trimming PU/PVC pre-coated windows.

Instructions

Clean the bonding surfaces with an active cleaner. Surfaces must be dry, dust and grease-free. Shake the Varioprimer before use. Apply with a primer brush or sponge applicator. When using the 10 ml tube, do not apply pressure to the tube to apply the correct amount of primer. For more information, please refer to the technical data sheet.

Technical information

Container	Stick
Contents	10 ml
Chemical basis	Polyurethane
Colour	Black
Min. flash-off time	10 min
Max. flash-off time	24 h
Flash-off time conditions	at 23°C and 50% relative humidity, as a primer, corrosion protection, activator
Min. processing temperature	10 °C
Max. processing temperature	35 °C