V-Euro compression fitting
V clamp/screw-in, eurocone
KLEMMVERSCHRAUBUNG 16X2,0-V EURO
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- For direct connection of embedded heating pipes to Eurocones
- Consisting of Eurocone with support, clamping ring and union nut
- With fixed stop - simple tightening up to the stop
Connection, tube diameter | 16 mm |
Connection thread | IT 3/4 inch Euro cone |
Width across flats | 27 mm |
Material | Brass / plastic |
Product weight (per item) | 65.000 g |
Datasheets (0)
Certificates/ Documents (0)
Services und Systeme rund ums Produkt
PRINETO compression fitting for HD pipe
Valve block with Eurocone MT
PRINETO PE-HDS ÖKO-FLEX panel heating pipe
PRINETO tacker needle with double hook
PRINETO heating circuit distributor with Regolux Memory VA
PRIPRESS® composite pipe
PRINETO flush-mounted distribution box
Soft-sealing straight terminal connector, 15 V, Euro
Clamping ring screw connection
Holder with gauge size 70/150 mm, stepped
PRIPRESS® composite pipe concentrically pre-insulated
PRIPRESS® T-piece
PRIPRESS® angle 90°
PRINETO terminal block
PRINETO sliding sleeve HD
PRINETO angle clasp
PRINETO self-adhesive edge insulating strip
PRINETO ball valve
PRINETO actuator
Protective sheath for underfloor heating
PRINETO coupling with sleeve
PRINETO room temperature controller
PRINETO HD panel heating pipe
PRINETO surface-mounted distribution cabinet
PRINETO panel heating pipe
PRINETO system roll with grid film
PRINETO corner ball valve set
PRINETO T-shaped expansion joint profile
PRINETO screed measuring point
PRINETO PE-HDS (HD-Xb S) ÖKO-FLEX HOOK-AND-LOOP panel heating pipe green-linked
PRIPRESS® Connecting bend L
Hemp
Stop end With hexagon socket
Soft-sealing straight terminal connector, 15 V, Euro
Valve block with Eurocone MT
Bracket for single wall bracket, stepped
Holder with gauge size 70/150 mm, straight
Holder with gauge size 70/150 mm, stepped
Bracket With gauge size 80/100 mm, straight
Bracket With gauge size 80/100 mm, stepped
Thread sealant paste
PTFE thread-sealing tape
Thread sealing tape
