Combi diamond mortar raking blade

Name: Combi diamond mortar raking blade
Brand: Würth
SKU: 5527961129

Diamond cutting disc combi f. wall slitting cutter
CUTDISC-DIA-COMBI-F.WC-TH19-BR22,23-D125

Art.-no. 5527961129

EAN 4056807817064

All versions

Specification

For fast cutting and simultaneous milling of cable ducts with wall slitting cutters with at least 1800 W. The laborious and time-consuming removal of the centre bar is no longer necessary.

Time saving of up to 50%

The special arrangement and geometry of the side-by-side diamond cutting discs enables cutting and milling in a single process.

Protection against undercut, especially when working with particularly abrasive materials

Special protective segments

Reduction of dust and dirt

Simultaneous cutting and milling as well as the aid of the wall slitting cutter means that dust and dirt is sucked out from the entire slot during operation.

Ideal for 20 or 25 mm empty tubes

The slightly undersize class achieves a certain basic clamping of the empty tube (without additional mounting material), further facilitating work.

Notice

Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient circumferential speeds

If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts

Separate larger workpiece cross-sections into several sections (swing cut)

Work without applying pressure — the weight of the machine is sufficient. Increased pressure causes increased wear.

Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!

Despite the level of safety offered by the tool, always wear safety glasses and clothing while working

Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions

The direction arrow on the disc must match the machine's direction of rotation

Must not be used for lateral grinding

Use the appropriate protective hood

Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)

If grinding tools are clamped wrongly or used incorrectly or are damaged, they represent a danger and may cause serious injury

Sand-lime brick, aerated concrete, pumice, concrete products, concrete, concrete (lightly reinforced), ideal for a hollow-chamber bricks (Poroton etc.). In the case of particularly hard materials, produce the maximum working depth in two steps.

Technical information

Versatility (points system)	3 of 4 points
Service life (points system)	2 of 4 points
Cutting speed (point system)	3 of 4 points
Cut quality (point system)	2 of 4 points
Diameter (Ø)	125 mm
Cutting width	19
Drill hole	22.23 mm
Segment height	10 mm
Segment thickness	2.2 mm
Number of segments	26 PCS
Segment connection	Laser
Max. rotation speed	12250 rpm
Max. circumferential speed	80 m/s