Casting resin connection sleeve MU 0.6/1 kV
Casting resin connection sleeve MU1-6
JNTSLEV-CASTRESIN-MU1-(7-16MM)
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Advantages of MU casting resin set (including casting resin):
- Completely watertight both horizontally and vertically
- Approved in accordance with DIN VDE 0165 for explosion-prone areas
- High mechanical strength
Advantages of WÜ casting resin:
- The casting resin complies with DIN VDE 0291 Part 2 and is suitable up to 10 kV.
- High hydrolysis resistance
- Long shelf life (24 months)
- Good resistance to UV radiation and chemical influences
- Low viscosity
- Excellent adhesion to metals and plastics
- Soft elastic once hardened
- Halogen-free
DIN VDE 0278
 | |
Type description | MU 1 |
Min./max. cable diameter | 7-16 mm |
Cable type | 4 x 4 to 5 x 1.5 mm² |
Length x height | 180 x 25 mm |
Min. cable diameter | 7 mm |
Max. cable diameter | 16 mm |
Length | 180 mm |
Height | 25 mm |
Services und Systeme rund ums Produkt
Gel connection/joint sleeve WGM 0.6/1 kV
Casting resin bag with casting resin type WÜ up to 10 kV DIN VDE 0278
Casting resin branch set AB 0.6-1 kV
Cable tie KBL 1 made of polyamide with plastic tongue
Clip, metric
Electrical insulating tape
Connecting sleeve
2C casting and adhesive resin CERAfix® 203
Heat-shrink connection set 0.6/1 kV
Self-fusing shrink tape
Plastic multi-purpose Zebra Shark® anchor without collar
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
VDE junction box WMini
Manual drive-in stud With large collar
2-component grounding contact plug For cables up to 3G 2.5 mm²
Nylon anchor For light loads (secondary attachments)
pias® drilling screw, flat head with AW drive
Cable gland, polyamide Metric according to EN 60423/EN 62444
Twist drill bit HSS DIN 338 type RN 118°
Multi-range clamp
Nail plate Rectangular design, 34 x 27 mm
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
VDE junction box W12
Wago screwless connection terminal For all types of copper wire
2-wire lamp clamp, screwless For single-wire and multi-wire copper conductors
WÜPOFAST® zinc-plated blue chipboard screw
Plasterboard plug W-GS Type ZD made from die-cast zinc
Washer with round hole Mainly for wood construction, DIN 440, zinc-plated steel, blue passivated (A2K)
VDE screwdriver set 14 pieces
VDE pliers assortment, IEC 60900 4 pieces
Wire stripping pliers, adjustable
Casting resin bag with casting resin type WÜ up to 10 kV DIN VDE 0278
Industrial Cleaning Wipes
Double-sided hook and loop fastener strip
Nitrile chemical protective glove With cotton velour finish inside
Mechanical manual crimping pliers
Heat-shrink wall duct
Heat-shrink repair sleeve
Gel connection/joint sleeve WGM 0.6/1 kV
Self-fusing shrink tape
Soldering gun Turbojet 5 pcs in system case 8.4.2
