Trapezoidal mount With welded-in nut
Trapezoidal mount with welded-in nut
TRPZCEILHNG-WELDNUT-M10
VARIFIX
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- Fastening by means of push-through installation with M8 threaded rod
- Also possible with 4.0 mm AIMg 5 sealing rivets (DIN 1725) or 4.2 mm drilling screws made from case-hardened steel
- Easy adjustment to different trapezoidal plate profiles thanks to specified bending points
- Sendzimir galvanised - continuous hot-dip galvanised steel strip material
Our products certified as Cradle to Cradle Certified® are resource-conserving and environmentally compatible. The standard assesses the safety, recyclability and pollutant content of materials in the final product. The focus here is on conserving resources, for example, by using recycled material in the manufacturing process.
Approved by VdS for fastening pipes up to DN 50. The maximum permissible load is dependent on the trapezoidal plate thickness.
VdS certification no. G 4021037
 | |
Surface | Sendzimir galvanized |
Width (B) | 25 mm |
Limb length (LS) | 94 mm |
Material thickness (t) | 2.5 mm |
Round hole diameter (RL) | 9.5 mm |
Round hole diameter 2 (RL2) | 4.2 mm |
Permissible load | 0.8 kN |
Material | Steel |
Suitable for threaded rods | M10 |
Weight | 100 g |
Sustainability | Resources, Pollutants / Emissions |
Datasheets (0)
Certificates/ Documents (3)
Services und Systeme rund ums Produkt
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Trapezoidal mount Without acoustic insulation
Trapezoidal mount With knurled nut for height adjustment
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Trapezoidal hole punch
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Trapezoidal mount With acoustic insulation
Swing hook
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
VARIFIX® c-assembly rail 41/41
Trapezoidal plate hook
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Spacer sleeve Hexagon, zinc-plated steel
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
VARIFIX® Systemfix 41 quick fastener For assembly connection of all Varifix mounting rails in the 41 range
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Machinist's hammer German design in accordance with DIN 1041
VARIFIX® c-assembly rail 26/18
VARIFIX® c-assembly rail 41/22
VARIFIX® retaining clips zinc-plated
Flat washer For hexagon head bolts and nuts
Rail end plugs
VARIFIX® beam clamp, standard With threaded hole
VARIFIX® retaining clip, heavy-duty zinc-plated
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
VARIFIX® profile foot
VARIFIX® c-assembly rail 28/28
