Scaffolding anchor system
Scaffolding anchor system
ANC-FRM-PLA-14X70
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- Anchor sleeve and eyelet screw are perfectly coordinated to guarantee maximum safety
- Anchor made of high-quality polyamide (nylon)
- Polyamide anchors may be used only once to ensure maximum load capacity
- The eyelet screw must be screwed into the anchor until the screw tip protrudes from the front of the anchor by at least 1x the screw diameter. This is the only way to achieve the maximum load capacity
- The polyamide (nylon) anchor must not be reused
- Drill hollow block brick without impact mechanism
- Using carbide multi-purpose drill bits allows for a much better drill hole to be produced in perforated brick and much higher extraction values
- Hollow block brick should generally be drilled without an impact mechanism
Drill hole
Clean the drill hole
Install anchor
Screw in securing element
- When attaching free-standing scaffolding, GR Ø 14 must be used with eyelet screw GS 12
- Suitable for anchoring in solid materials, concrete, solid brick and rock, excluding lightweight concrete
- For perforated brick and lightweight or aerated concrete, we recommend using our HBR Ø 14 plastic frame anchor (large expansion zone) in conjunction with a GS 10 eyelet screw, and using a carbide multi-purpose drill bit for the drill hole to ensure optimum holding power
Anchor diameter | 14 mm |
Anchor length (l) (l) | 70 mm |
Embedding depth (h nom) | 70 mm |
Nominal drill-bit diameter (d 0) | 14 mm |
Drill hole depth (h 1) | 80 mm |
Characteristic values | ||||
Eyelet diameter | [mm] | 22 | 30 | 25 |
Edge distance | ar ≥ [mm] | 100 | 120 | 180 |
Tightening torque | MD [Nm] | – | – | – |
Drill hole depth | t ≥ [mm] | 60 | 70/1001) | 80 |
Setting depth | hS ≥ [mm] | 50 | 60/901) | 70 |
Minimum component thickness | d ≥ [mm] | 120 | 120 | 175 |
Thread dia. | dthr. [mm] | 8 | 10 | 12 |
Nominal drill diameter | ddrl. [mm] | 10 | 12 | 14 |
Hole diameter in component | dcon [mm] | – | – | – |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Services und Systeme rund ums Produkt
Eyelet screw GS
Cover cap AK for GR 14 scaffolding anchors
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Plastic multi-purpose Zebra Shark® anchor without collar
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Nylon anchor For light loads (secondary attachments)
Plastic multi-purpose ZEBRA Shark® anchor with collar
Plastic multi-purpose anchor SHARK® Pro
Plus Quadro-L Vario hammer drill bit
ASSY® 3.0 zinc-plated blue chipboard screw
Nail anchor SHARK® Hammer TYPE SK
Aerated concrete anchor W-GB
Securing sleeve
ASSY® 3.0 zinc-plated yellow chipboard screw
Plastic frame anchor W-UR 14
Plus Quadro-L hammer drill bit
Plumber's sealing screw, A2 stainless steel
Metal cavity anchor W-MH/L pan-head screw
Cable tie KBL 1 made of polyamide with plastic tongue
Scaffolding ratchet
2C multi-purpose anchor SHARK® TWIST One anchor. Eight knots.
Refuse bag Without pull tie
Mechanic's glove
Twist drill bit HSS DIN 338 type RN 118°
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head
Bond + Seal structural adhesive
Neutral silicone Perfect
High Power battery
Fixanchor W-FAZ/S
