SHARK TWIST 2C multi-purpose anchor

Name: SHARK TWIST 2C multi-purpose anchor
Brand: Würth
SKU: 590681476

2C plastic multi-purpose anchor Shark TWIST
DWL-PLA-SHARK-TWIST-14X76

Art.-no. 590681476

EAN 4065746430517

All versions

Specification

The simple, innovative multi-purpose anchor combines flexibility and ease of installation with an eight-way knot

One anchor. Eight knots.

The anchor can be inserted flush using just one finger, without the need for a hammer

Easy to screw in, which allows for quick fastening

For universal use

For fastening components in conjunction with a screw with a wood thread and metric thread

Each anchor size can be combined with several screw diameters

High level of safety

Eight knots with extremely large contact surface provides secure hold

High load values for anchors in a redundant non-structural system in concrete and masonry in conjunction with the ASSY-D screw, proven in ETA assessment, for greater safety

Low installation torque and high overtorque

Overwind protection, prevents overtightening of the anchor in the drill hole

Durability and resistance

Resistant to rotting, weathering and ageing

UV-resistant for up to six weeks

Wide range of fastening options

Ideal for fastening light to medium loads

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Other advantage

Due to the special plastic combination of the SHARK TWIST, even screws with metric threads can be screwed in without any problems, for example, threaded studs or rods for suspended items in plumbing installations or metric screws

Proof of Performance

ETA-22/0877

Notice

For installation, we recommend the ASSY-D screw.

Application area

Autoclaved aerated (cellular) concrete

Vertically perforated brick with small bars

Vertically perforated bricks with lateral bars

Concrete

Panel materials with chipboard screw

Panel materials with metric screw

Instructions

Inserting the anchor

Can be used with one finger without a hammer

Drill the hole

Remove drill cuttings from drill hole

Place anchors in drill hole

Screw in the screw flush through the attachment part

Drill the hole

Place anchors in drill hole

Screw in the screw flush through the attachment part

Drill the hole

Place anchors in drill hole

Screw in the screw flush through the attachment part

ETA-22/0877

Application

Application area

Universal plastic anchor

Can be used in concrete, solid brick, solid sand-lime block, vertically perforated brick, hollow sand-lime block, autoclaved aerated concrete, gypsum plasterboard, gypsum fibreboard

Suitable for fastening light to medium loads, such as curtain rails, wall shelves, lightweight hanging cabinets, picture frames, mirrors, lamps, cable ducts, cable clamps, electrical switches, washbasins, towel rails, information signs and motion detectors

Technical information

Anchor diameter	14 mm
Material	Polypropylene - PP / polyamide - PA
Colour	White, Anthracite
Anchor length (l)	76 mm
Nominal drill-bit diameter (d 0)	14 mm
Drill hole depth (t)	85 mm
Edge clearance (a r)	150 mm
Embedding depth (h s)	75 mm
Min./max. required screw diameter	10-12 mm
Min./max. temperature conditions	-40 to 50 °C

Stone type	Mirror thickness d_U [mm]	Minimum compressive strength [N/mm²]	Fadm [kN] ¹⁾⁵⁾ (for individual anchors or an anchor group)
			SHARK TWIST 6	SHARK TWIST 8	SHARK TWIST 10	SHARK TWIST 12	SHARK TWIST 14
Effective anchorage depth	h_nom [mm]		35	45	55	65	75
Hollow-core prestressed concrete EN 206:2013+A1:2016	≥25	≥ C30/37	0,30	0,48	0,48	0,48	0,48
Hollow-core prestressed concrete EN 206:2013+A1:2016	≥40	≥ C30/37	0,60	0,60	0,60	0,60	0,60
¹⁾The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of F = 1.4 have been taken into account. For the combination of tensile and shear loads, please note EAD 330284-00-0604 ²⁾Maximum long-term temperature ³⁾Maximum short-term temperature ⁴⁾For other types of stone, raw densities, minimum compressive strengths or temperature ranges, please refer to the assessment ETA-22/0877 ⁵⁾The stone geometry should be compared with the assessment ETA-22/0877.

SHARK TWIST load capacities
Anchor size	6	8	10	12	14
Base material	F_rec [kN]	F_rec [kN]	F_rec [kN]	F_rec [kN]	F_rec [kN]
Concrete ≥ C20/25	0,9	1,2	2	3	3,2
Solid brick ≥ MZ12	0,6	0,9	1,5	2	2,2
Solid calcium silicate block ≥ KSV12	0,7	1,4	2,3	3	3,2
Vertically perforated brick ≥ Hlz12	0,25	0,35	0,4	0,5	0,6
Hollow calcium silicate block ≥ KSL12	0,5	0,7	1	1,4	1,6
Autoclaved aerated concrete PB2; PP2	0,15	0,2	0,25	0,4	0,5
Gypsum building panels ρ ≥ 0.85 kg/dm³	0,22	0,35	0,5	0,6	0,7
Gypsum plasterboard dia. = 12.5 mm	0,1	0,2	0,2	-	-
Gypsum plasterboard dia. = 25 mm	0,2	0,25	0,35	-	-
Gypsum fibreboard dia. = 10 mm	0,3	0,35	0,45	-	-

Assignment of metric fasteners by anchor size
	Anchor dia. 6	Anchor dia. 8	Anchor dia. 10	Anchor dia. 12	Anchor dia. 14
Suitable screw diameter (wood thread)	4 to 5 mm	5 to 6 mm	6 to 8 mm	8 to 10 mm	10 to 12 mm
Suitable screw diameters (metric) - solid and perforated construction materials	M4	M5	M6	M8	M10
Suitable screw diameters (metric) - panel materials	M3	M4	M5	-	-

Installation parameters: Concrete + masonry
Anchor diameter [mm]		SHARK TWIST 6	SHARK TWIST 8	SHARK TWIST 10	SHARK TWIST 12	SHARK TWIST 14
Nominal drill dia.	d₀ [mm]	6	8	10	12	14
Dia. of cutting edges	d_cut ≤ [mm]	6,4	8,45	10,45	12,5	14,5
Drill hole depth	h₁ ≥ [mm]	ls + 5 mm - tfix
Embedment depth of the anchor sleeve	h_nom [mm]	35	45	55	65	75
Through hole in the fixture	d_f ≤ [mm]	5,5	6,5	8,5	10,5	12,5

Performance data: Masonry^₄₎, (temperature range 30 °C²⁾/50 °C³⁾)
For other types of stone, raw densities, minimum compressive strengths, edge distances, spacings or temperature ranges, please refer to the assessment ETA-22/0877
Stone type	Stone format [mm]	Raw density class [kg/dm3]	Minimum compressive strength [N/mm2]	Fadm [kN] ¹⁾⁵⁾ (for individual anchors or an anchor group)
Stone type	Stone format [mm]	Raw density class [kg/dm3]	Minimum compressive strength [N/mm2]	SHARK TWIST 10	SHARK TWIST 12	SHARK TWIST 14
Effective anchorage depth	h_nom [mm]			55	65	75
Masonry brick Mz, EN 771-1:2011+A1:2015	≥NF (≥240x115x71)	≥ 1.8	10	0,34	0,42	0,42
			12,5	0,42	0,57	0,57
			15	0,57	0,71	0,71
			20	0,71	1,00	1,00
			25	0,85	1,28	1,28
			35	1,28	1,57	1,57
			45	1,71	1,85	2,00
			54,8	1,85	2,00	2,14
Vertically perforated brick HLz, EN 771-1:2011+A1:2015	≥2DF (≥240x115x113)	≥1.2	10	0,21	0,42	0,57
			12,5	0,25	0,57	0,71
			15	0,34	0,57	0,71
			20	0,42	0,71	0,71
			24,1	0,57	0,71	0,71
Solid calcium silicate block KS, EN 771-2:2011+A1:2015	≥NF (≥240x115x71)	≥ 1.8	10	0,34	0,42	0,42
			12,5	0,42	0,57	0,57
			15	0,57	0,71	0,71
			20	0,71	1,00	0,85
			25	1,00	1,28	1,14
			35	1,42	1,57	1,57
			45	1,71	1,85	2,00
			49,4	1,71	1,85	2,00
Solid calcium silicate block KS, EN 771-2:2011+A1:2015	≥4DF (≥248x175x248)	≥ 1.8	10	0,85	1,00	1,00
			12,5	1,00	1,14	1,14
			15	1,14	1,14	1,28
			20	1,28	1,42	1,42
			23,4	1,28	1,42	1,42
Hollow calcium silicate block KS L, EN 771-2:2011+A1:2015	≥2DF (≥240x115x113)	≥ 1.8	10	0,42	0,71	0,71
			12,5	0,57	0,71	0,71
			15	0,57	0,71	0,71
			18,8	0,71	0,71	0,71
Hollow calcium silicate block KS L, EN 771-2:2011+A1:2015	≥8DF (≥248x240x238)	≥ 1.8	7,5	-	0,57	0,71
Hollow calcium silicate block KS L, EN 771-2:2011+A1:2015	≥8DF (≥248x240x238)		10	-	0,71	0,71
Solid blocks made of lightweight concrete V and Vbl, EN 771-3:2011+A1:2015	≥NF (≥240x115x71)	≥1.2	2,5	0,21	0,34	0,42
			5	0,42	0,57	0,57
			7,3	0,57	0,71	0,71
Solid blocks made of lightweight concrete V and Vbl, EN 771-3:2011+A1:2015	≥NF (≥240x115x71)	≥2.0	12,5	0,85	1,14	-
			15	1,00	1,42	-
			20	1,28	1,85	-
			25	1,71	2,00	-
			29	1,85	2,00	-
¹⁾The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of F = 1.4 have been taken into account. For the combination of tensile and shear loads, please note EAD 330284-00-0604 ²⁾Maximum long-term temperature ³⁾Maximum short-term temperature ⁴⁾For other types of stone, raw densities, minimum compressive strengths or temperature ranges, please refer to the >>assessment ETA-22/0877 ⁵⁾The stone geometry should be compared with the assessment ETA-22/0877.

Performance data: Concrete Anchors in a redundant non-structural system
Anchor diameter		[mm]	SHARK TWIST 6	SHARK TWIST 8	SHARK TWIST 10	SHARK TWIST 12	SHARK TWIST 14
Embedment depth of the anchor sleeve		h_nom [mm]	35	45	55	65	75
Centric tension load^₁₎ for individual anchors or an anchor group	Concrete = C12/15 N_adm [kN]	30 °C²⁾/50 °C³⁾	0,48	0,8	1,6	2,2	2,4
	Concrete ≥ C16/20 N_adm [kN]	30 °C²⁾/50 °C³⁾	0,6	1,2	2,2	2,8	3,2
Shear load¹⁾ for individual anchors or an anchor group	V_adm	[kN]	1,62	2,59	4,67	6,79	8,55
Minimum member thickness	h_min	[mm]	100	100	100	120	120
Characteristic edge distance	c_cr [mm]	C12/15	110	110	110	140	140
Characteristic edge distance	c_cr [mm]	≥ C16/20	80	80	80	100	100
Characteristic spacing	s_cr [mm]	C12/15	110	110	130	140	155
Characteristic spacing	s_cr [mm]	≥ C16/20	80	80	90	100	110
Minimum edge distance⁴⁾	c_min [mm]	C12/15	110	110	110	140	140
Minimum edge distance⁴⁾	c_min [mm]	≥ C16/20	80	80	80	100	100
Minimum spacing⁴⁾	s_min [mm]	C12/15	110	110	110	140	140
Minimum spacing⁴⁾	s_min [mm]	≥ C16/20	80	80	80	100	100
¹⁾ The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of F = 1.4 have been taken into account. For the combination of tensile and shear loads, please note EAD 330284-00-0604 ²⁾ Maximum long-term temperature ³⁾ Maximum short-term temperature ⁴⁾ Admissible load must be reduced

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D14,0-L210-WL160MM

ZEBRA

Art.-no. 0648051421

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

2C SHARK<SUP>® </SUP>TWIST multi-purpose anchor assortment 450 pieces

2C SHARK® TWIST multi-purpose anchor assortment 450 pieces

DWL-SYSKO-(SHARK TWIST)-PLA-450PCS

SYSTEMKOFFER

Art.-no. 5964590680

One anchor. Eight knots. The innovative multi-purpose anchor combines performance, flexibility and ease of installation, thereby offering a wide range of possible applications. The assortment includes all SHARK^® TWIST sizes in one system case.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).