Plastic frame anchor W-UR 10 XXL W-UR 10 XXL

Name: Plastic frame anchor W-UR 10 XXL W-UR 10 XXL
Brand: Würth
SKU: 0912810901

Plastic frame anchor, W-UR 10 XXL
ANC-(W-UR10 XXL)-PLA-10X200
ZEBRA

Art.-no. 0912810901

EAN 4050642952416

All versions

Specification

For use in perforated brick with large chambers and solid bars in conjunction with the AMO Combi screw

Fast, precise and stable installation due to precisely fitting frame fixing

Time-saving due to immediate load-bearing capacity

Suitable for removable anchorage

Optimal fastening for demanding perforated blocks with solid webs and large chambers that reliably anchor at least 2 webs

Proof of Performance

Component test with frame anchor W-RD 10 using AMO III screw to attach a glazed plastic door without lateral supports or spacer blocks in POROTON T12 clay block. Test report no. 105 44179/2 dated 23 December 2010

Component test with frame anchor W-UR 10 XXL using AMO Combi screw to attach a glazed plastic door without lateral supports or spacer blocks in POROTON-T8-36.5 MW masonry. Test report no. 11-001214-PR01 dated 17 October 2011

Expert opinion from ift Rosenheim dated 5 March 2012 no.: 12-000288-PR01 confirms that test report no. 105 44179/2 dated 23 December 2010 is also applicable to the AMO Combi screw and the W-UR 10 XXL.

Notice

Check the correct installation of the components, taking into account the respective local construction conditions (e.g. weight of window casement, surface properties, hole arrangement in the brick)

Fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4 may only be attached with the AMO-Combi screw if appropriate individual approval has been obtained before installation starts

The screw length should correspond to the length of the anchor plus the diameter of the screw

Anchorage design is not required up to the verified window size for the tested surfaces and the appropriate installation

The screw is no longer than the anchor and therefore reaches the second chamber in modern filled perforated blocks, ensuring that the anchor is guided correctly into the drill hole and the frame. Consequently, the load-bearing capacity is not reduced.

Application area

Pre-drilling window frame

Create the drill hole

Install anchor

Screw in the screw

Application

Application area

For perforated blocks with large chambers, the AMO-Combi screw, which anchors at least 2 webs, is recommended

Instructions

Drill perforated and hollow concrete blocks with a rotary drill (without hammer mechanism)

Drill cuttings must be removed from the drill hole

Window walls compliant with the former DIN 18056 standard or elements with a surface area in excess of 9 m² and fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4: The DIN 18056 standard applied to window walls with a minimum surface area of 9 m² and a minimum side length of 2 m on the shortest side. Use anchors with general or European Technical Approval or with individual approval for this application. Similarly, only use anchors with construction product approval, European Technical Approval or with individual approval to attach fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4.

Installation temperature in base material ≥ -20 °C

Installation temperature of the anchor sleeve ≥ 0 °C

Technical information


Anchor diameter	10 mm
Anchor length (l)	208 mm
Nominal drill-bit diameter (d 0)	10 mm
Drill hole depth (h 1)	210 mm
Approval	DIBt Z-21.2-2017

Performance data
	Brick format [mm]	Minimum compressive strength [N/mm²]	Engagement length [mm]	Free screw length [mm]	Axial tensile load [kN]	Transverse tension [kN]
Concrete	–	C20/25	30	15	0,7	0,7
Solid sand-lime brick e.g. Silka XL Plus	248 x 175 x 488	28,0	50	15	0,6	0,6
Hollow sand-lime brick e.g. Silka 8 DF	248 x 240 x 238	12,0	50	15	0,5	0,5
POROTON-T8-36,5-LZ-P	248 x 365 x 249	6	W-UR 10 XXL	15	–	0,4
Wood (spruce)	–	–	60	15	0,6	0,6

Characteristic values
General	Minimum edge distance	Concrete	c_min [mm]	50
	Minimum edge distance	Sand-lime brick, solid brick, vertically perforated brick (min. 2 walls), softwood	c_min [mm]	60
	Minimum engagement length	Concrete	h_nom,min [mm]	30
		Sand-lime brick, solid brick		50
		Vertically perforated brick (min. 2 walls), softwood		60
	Nominal drill diameter	Concrete	d₀ [mm]	6,5
		Sand-lime brick, solid brick		6,0
		Vertically perforated brick (min. 2 walls)		10.0 in conjunction with W-UR 10 XS
		Vertically perforated brick (min. 2 walls with large chambers and filling), lightweight concrete (with filling)		10.0 in conjunction with W-UR 10 XXL
		Softwood		No pre-drilling required
		Window frame AMO^®-Combi	d [mm]	10,2
		Window frame W-UR 10 XS / W-UR 10 XXL	d [mm]	10,5
	Drill hole depth	Without anchors	h₁ [mm]	Engagement length + 10 mm + any existing plaster coat
		Plastic frame anchor W-UR 10 XS		min. 80 mm
		Plastic frame anchor W-UR 10 XXL		min. 210 mm

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents (2)

Example of use 1

Approval/Assessment 1

CAD data

Click here for the complete CAD library.

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

AMO<SUP>®</SUP>-Combi 7.5/11.5 window frame screw

AMO®-Combi 7.5/11.5 window frame screw

SCR-(AMO-COMBI)-RW30-A2K-7,5/11,5X135

ZEBRA

Art.-no. 0234030135

The universal solution for attaching windows in concrete, perforated and solid brickwork and wood

x 100 pcs

AMO®-Combi 7.5/11.5 window frame screw

SCR-(AMO-COMBI)-RW30-A2K-7,5/11,5X150

ZEBRA

Art.-no. 0234030150

The universal solution for attaching windows in concrete, perforated and solid brickwork and wood

x 100 pcs

AMO®-Combi 7.5/11.5 window frame screw

SCR-(AMO-COMBI)-RW30-A2K-7,5/11,5X180

ZEBRA

Art.-no. 0234030180

The universal solution for attaching windows in concrete, perforated and solid brickwork and wood

x 100 pcs

AMO®-Combi 7.5/11.5 window frame screw

SCR-(AMO-COMBI)-RW30-A2K-7,5/11,5X242

ZEBRA

Art.-no. 0234030242

The universal solution for attaching windows in concrete, perforated and solid brickwork and wood

x 100 pcs

Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D10-L450-WL400MM

ZEBRA

Art.-no. 0641231045

Drills through virtually any material

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).