Light tile adhesive PLUS CERAfix^® 403 C2 TE S1Flex/XL

Name: Light tile adhesive PLUS CERAfix ® 403 C2 TE S1Flex/XL
Brand: Würth
SKU: 5875100403

Light tile adhesive Plus CERAfix 403 C2 TE S1
TLELGHTADH-(CERAFIX403PLUS)-15KG
CERAFIX

Art.-no. 5875100403

EAN 4062856817825

All versions

Specification

Light tile adhesive that produces little dust for all ceramic coverings in accordance with EN 12004/12002 C2 TE S1 in a plastic bag

Very high degree of flexibility

Fulfils the requirement criteria of the information leaflet for flexible mortar

Very versatile

Can be adjusted as thin, medium, thick and pourable bed mortar

Quality-tested in accordance with Euro standards

Fulfils and exceeds class C2 in accordance with EN 12004

Fulfils class S1 for pliable tile adhesive

Minimal dust

For variable and versatile use

Can be used as compensating filler and thin bed, medium bed and pourable bed mortar

Ideal for all ceramic coverings

Excellent stability and high degree of initial adhesion

Prevents wall covering tiles from slipping

Heavy and large tiles can be securely bonded

Long adhesive drying and processing times

Corrections can be made long after tiles are laid

Fast laying progress

Resistant to thawing/freezing alternations

Suitable for indoor and outdoor use

Can be used in wet rooms and swimming pools exposed to high stresses

Suitable for underfloor heating

Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Proof of Performance

Tested in accordance with EN 12002 S1

Fire behaviour: A1/A1fl

Adhesive pull strength after dry storage: ≥ 1 N/mm²

Adhesive pull strength after water storage: ≥ 1 N/mm²

Adhesive pull strength after warm storage: ≥ 1 N/mm²

Adhesive pull strength after alternating freezing/thawing stress: ≥ 1 N/mm²

Slip resistance: ≤ 0.5 mm

EMICODE EC1plus: Very low emissions: The EMICODE classification system distinguishes the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

Notice

Protect the setting product from solar radiation, draughts, driving rain, frost and excessively high temperatures (≥ +25°C)

Material that is already setting must not be subsequently diluted with water

Observe the processing guidelines provided by the manufacturer. If necessary, test surfaces must be created

The product has an alkaline reaction to moisture

This product is low-chromate in accordance with directive 2003/53/EC

Please observe the valid safety data sheet, GISCODE: ZP1

Application area

Coverage	Approx. 1.6 to 1.9 kg/m² using a 6 mm notched trowel Approx. 2.2 to 2.5 kg/m² using an 8 mm notched trowel Approx. 2.9 to 3.2 kg/m² using a 10 mm notched trowel
Storage	Dry, 12 months in original sealed Würth container, once opened use immediately
Cleaning	With water immediately after use
Delivery format	15 kg plastic sack
Disposal	Dispose of cured product residues under waste code 17 09 04 as common construction and demolition waste.
* At +20°C and 50 % relative humidity; lower temperatures lengthen and higher temperatures shorten the indicated times. ** The amount of water required is based on empirical values. It may be necessary to add more water depending on the application.

Tested in accordance with EN 12002 S1

Fire behaviour: A1/A1fl

Adhesive pull strength after dry storage: ≥ 1 N/mm²

Adhesive pull strength after water storage: ≥ 1 N/mm²

Adhesive pull strength after warm storage: ≥ 1 N/mm²

Adhesive pull strength after alternating freezing/thawing stress: ≥ 1 N/mm²

Slip resistance: ≤ 0.5 mm

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Used for the safe and economic laying of ceramic coverings such as earthenware, stoneware, stoneware tiles (water absorption < 0.5 %), clinker brick, brick tiles and ceramic mosaics. PLUS CERAfix 403 light tile adhesive is suitable for secure laying on all substrates in accordance with DIN 18157, Part 1, e.g. concrete, autoclaved aerated concrete, suitable plaster, cement and calcium sulphate/hot screed or melted tarmac screed of hardness class IC10, masonry, gypsum plasterboard as well as on old securely adhered tiles using a suitable primer. Also suitable as bonding material for lightweight panels, e.g. hard foam and tile support elements. Suitable for laying tiles on mineral CERAfix 301 compound sealant and dispersion-bonded CERAfix 302.

Uneven substrates can be levelled out using PLUS CERAfix 403 light tile adhesive (before laying the tiles) up to a layer thickness of 15 mm on walls and on the floor.

Instructions

Mix light tile adhesive PLUS CERAfix 403 with drinking water in a clean container, ensuring mixture is free from clumps.

Mixing ratio:

As pourable bed mortar: 10.0-10.5 l water: 15 kg light tile adhesive PLUS CERAfix 403

As levelling filler: 7.4-7.9 l water: 15 kg light tile adhesive PLUS CERAfix 403

As thin bed mortar: 7.5-8.2 l water: 15 kg light tile adhesive PLUS CERAfix 403

When using light tile adhesive PLUS CERAfix 403 as a pourable bed adhesive, first mix with approx. 8 l water and then mix in the rest of the water until a pourable bed consistency is achieved. Give the product 4 minutes to mature and then stir again. Use the adhesive mortar within the processing time. Spread a flat layer of the mixed adhesive on the surface and comb through with the toothed trowel suitable for the panel size. Lay the covering materials within the adhesive drying time (test with your finger).

Technical information

Weight of content	15 kg
Container	Plastic sack
Chemical basis	Cement, polymer modified additives
Standards	EN 12004
Building material class	A1, fl - Non-flammable
Colour	Grey
Min./max. processing temperature	5 to 25 °C
Processing time	2 h
Application conditions	at 20°C and 65% relative humidity
May be walked on after max.	24 h
May be walked on in following conditions	at 20°C and 65% relative humidity
Groutable after	24 h
Grouting condition	at 20°C and 65% relative humidity
Full load capacity/conditions	7 d / at 20°C and 65% relative humidity
Shelf life from production/conditions	12 Month / cool and dry storage area
Sustainability	Pollutants / Emissions

Application quantity in weight/area	Approx. 1.3 kg/m²	for 6 mm toothing
	Approx. 1.8 kg/m²	for 8 mm toothing
	Approx. 2.2 kg/m²	for 10 mm toothing
	Approx. 3.2 kg/m²	for 12/20 mm medium bed toothing

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (1)

Safety data sheet

Certificates/ Documents

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Tile dispersion primer CERAfix<SUP>®</SUP> 101

Tile dispersion primer CERAfix® 101

PRIM-(CERAFIX-101)-10LTR

CERAFIX

Art.-no. 5875100101

Solvent-free, ready-to-use, dispersion-based universal primer for indoor and outdoor use

x 1 pcs