HSS Performance die For standard metric ISO thread
Die, HSS WN M-thread
THRDIE-HSS-WN-STEEL-PERFORMENCE-M8
ZEBRA
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Flexible use with cordless drill screwdrivers and on the lathe
The factory-standard dies in the outer diameter of 25x9 mm enable time-saving, true-to-gauge cutting (M3–M10) and repair (M3–M12) of male threads in the 3-jaw chuck in conjunction with the specially developed adapter (Art.0659999001).
Economic manual use
Instead of five tools, only one die holder is required for manually cutting male threads M3–M12.
Outstanding performance
- Up to twice the service life thanks to the surface nitration and newly developed tool geometry
- Excellent chip removal in cutting direction thanks to the spiral point
High level of process reliability
due to the lapped, nitrated surface and a longer cut
Easy to use
- Easier cutting and smaller torque compared to conventional dies
- Less friction than conventional dies
- Usable on both sides due to the two-sided cut
- When thread cutting, sufficient coolant and lubricant must be added.
- The dies are suitable for manual use with conventional die holders as well as for use with cordless drill screwdrivers and on the lathe (in conjunction with item 0659 990 001).
- For manual use, please note the following: The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. After two revolutions, the cut can be broken by briefly turning back.
- For use in cordless drill screwdrivers or lathes, please observe the operating instructions for the adapter specially developed for this, item 0659999001.
Cutting material | HSS |
Surface | Nitrated |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M8 |
Pitch | 1.25 mm |
Outer diameter | 25 mm |
Height | 9 mm |
Material to be processed | Steel, Cast iron |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Die For standard metric ISO thread HSCo Multi Performance
Thread die HSS DIN EN 22568 for standard metric ISO threads
Thread die HSS DIN EN 22568 for metric ISO fine threads
Die holder DIN EN 22568 Performance
HSS M3-M20 thread-cutting tool set
Die assortment HSS Performance M3-M12 for standard metric ISO threads 7 pieces
Die holder guide For drill drivers
Special die holder
Thread cutting tool set HSS M3-M12 44 pcs in system case 8.4.1
Hand tap, third tap HSS DIN 352
Die holder for drill drivers 6 pieces
Die assortment HSCo Multi Performance M3-M12 for standard metric ISO threads 7 pieces
Tap wrench DIN 1814 Performance, adjustable
Hand tap set HSS, DIN 352 3 pieces
Special die holder Size 1-6
Twist drill bit HSS DIN 340 type RN 130°
ALG 18 V M-CUBE charger
Spirit level with magnets
Backing pad with cooling grooves For vulcanised fibre discs
MINI WLH 0.5 cordless LED hand-held lamp
Jointed hook wrench with pin
1/2 inch socket wrench insert metric, hexagon, short
Twist drill bit HSS DIN 338 type RW
Fabric adhesive tape
Self-adhesive cover fleece
SL locking device
Windscreen cleaner Screenwash Plus
Ceramic HP welding spray
Twist drill bit assortment SS DIN 338 type RW, 19 pieces
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
