Flexible tape adhesive

Name: Flexible tape adhesive
Brand: Würth
SKU: 0893710000

Adhesive, Flexband glue
ADH-PLA-FLEXTAPE-CARTRIDGE-310ML

Art.-no. 0893710000

EAN 4038898921882

All versions

Specification

Special adhesive for secure and long-term bonding of Würth SK and Vario active flexible tape

Excellent adhesive properties

Extremely high adhesive strength on flexible tape and reveals. Airtight bonding allows installation in accordance with the German Buildings Energy Act.

Even adheres to slightly damp (but not wet) surfaces

Installation also possible in humid climates

Excellent stability

Compound does not run off masonry. Overhead application possible

Can be plastered and painted over

Silicone-free

Notice

Flexible tape adhesive, flexible tape adhesive plus and EPDM sealing tape adhesive may not come into contact with each other while wet.

Joint sealing connection systems according to ift certification program QM360: 2014, Reg. no. 188 7050098

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For airtight bonding that is impervious to driving rain of Würth SK and Vario active flexible tape and indoor sealing tape to window and door reveals. For compensating slight unevenness in reveals, for corner formations, joints and openings with Würth SK and Vario active flexible tape and indoor sealing tape.

Instructions

The application surfaces must be clean, dry and free of grease. Cut off the thread cap, screw on the nozzle and cut it to the required width. Apply the adhesive using a suitable application gun. Apply flexible tape adhesive as a 12–16 mm wide bead without any gaps. Lightly press on the flexible tape using a press-on roller. For more information, please refer to the technical data sheet.

Technical information

Container	Cartridge
Chemical basis	Polyurethane
Colour	Sand beige
Min. skin-formation time	50 min
Full curing speed/conditions	3 mm/d / Tested in accordance with Würth test methods
Min./max. processing temperature	5 to 35 °C
Min./max. temperature resistance	-40 to +80 °C
Shelf life from production/conditions	12 Month / at 15°C to 25°C, no exposure to sunlight, in tightly closed original container
Weight of content	360 g
Contents	300 ml
Silicone-free	Yes

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (1)

Safety data sheet

Certificates/ Documents (5)

Operation manual 1

Manufacturer's declaration 1

Technical data sheet 1

Technical data sheet 2

Certification/certificate 1

Accessory

Required accessory:

Product

Description

Quantity

PU

Price
/PU

Hand cartridge gun high-quality

MANCLKGGUN-CART-RED/BLACK-310ML

Art.-no. 089100

High-quality design, semi-open, made of sheet steel with plastic handle

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

PU

Price
/PU

Cartridge cutter

CARTKNFE

Art.-no. 071566 09

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle

x 1 pcs

Surface bonding agent Primer for Plastic/Wood/Stone

PRIM-BONDSEAL-PLA/WO/STN-250ML

Art.-no. 089010062

Optimisation of plastic, wood, stone and concrete surfaces

Adhesive remover

CLNR-STRUCADH-REMOVER-400ML

Art.-no. 089010063

Solvent mixture for dissolving/removing adhesives and sealants

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).