DUO-S impact drill bit with straight shank
Impact drill bit DUO-S cylindrical shank
DRL-IMP-CYL-D4-L75-WL39MM
ZEBRA
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Highly accurate drilling
Centring point with outstanding centring properties
Hammer-resistant, extremely robust and designed for the toughest applications
- State-of-the-art vacuum hardening
- Highly resilient cemented carbide tip
- Optimum soldering using high-vacuum technology, heat-resistant up to 1100°C
- Specially quenched and tempered clamping shank
- High-strength drill bit head, same shank material as the hammer drill bit
Fast drilling progress
- Aggressively ground cemented carbide plate
- Multi-spiral, large-volume spiral conveyor
Suitable for rotary and impact drilling
Special cemented carbide tip geometry
PGM tested
Suitable for drilling holes intended for anchor connections that are subject to approval.
Impact drilling in concrete, masonry, sand-lime brick and natural stone. Also for rotary drilling in ceramic and marble. Suitable for use in impact drills and rotary drills, as well as in hammer drills with a drill chuck adapter.
Diameter (Ø) | 4 mm |
Length | 75 mm |
Working length | 39 mm |
Shank diameter | 4 mm |
Tool holding device | Cylinder shank |
Versatility (points system) | 2 of 4 points |
Service life (points system) | 4 of 4 points |
Drilling speed (point system) | 4 of 4 points |
Bore hole quality (point system) | 3 of 4 points |
Datasheets (0)
Certificates/ Documents (0)
Hammer drill bit Plus Duo-S Vario
Plus Quadro-L Vario hammer drill bit
MFD-S multi-purpose drill bit with straight shank
DUO-S impact drill bit, 1/4-inch hexagonal shank
Brick and tile drill bit
Twist drill bit HSS DIN 338 type RN 118°
Twist drill bit HSS DIN 338 type RN 130°
Multi-purpose drill bit MFD-S Plus
Hammer drill bit Max Quadro-S
Twist drill bit HSCo DIN 338 type RN oxide
Hammer drill bit Plus Quadro-S
High Power battery
Impact drill bit cassette DUO-S, straight shank 10 pieces
Paint marker
ASSY® 3.0 zinc-plated blue chipboard screw
Cable tie KBL 1 made of polyamide with plastic tongue
VDE screwdriver, flat slotted
Metric combination wrench with POWERDRIV®
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Flat washer For hexagon head bolts and nuts
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Crimp cable lug, push connector PVC-insulated
Cutting disc Speed for steel
VDE screwdriver, PH recessed head For working on live parts up to 1,000 V (AC) and up to 1,500 V (DC)
Plastic multi-purpose Zebra Shark® anchor without collar
Crimp cable lug, push connector, fully insulated PVC-insulated
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Crimp cable lug, butt connector PVC-insulated
Metric ratchet combination wrench with POWERDRIV®
Plus Quadro-L hammer drill bit
