Collated nails and gas cartridge NG CS-2/3 HFBX Suitable for DIGA CS-2 Power and DIGA CS-3 Power
Collated nails and gas cartridge NG CS-2/3 HFBX
NL-(DIGA CS2/3)-FUELCELL-HFBX-22MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
- High-quality special nail with rolled ballistic tip for fastenings in high-strength concrete
- Fewer setting failures than with conventional nails
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Attachments on concrete substrate (normal weight concrete ≥ C 20/25 ≤ C 50/60) according to DIN EN 206, steel and solid brick masonry in the installation area, dry walling, etc.
Material of nail | Steel, specially hardened |
Surface | Zinc plated |
Length of nail | 22 mm |
Diameter of nail | 3.0 mm |
Head diameter | 6.3 mm |
Number of nails | 800 PCS |
Contents | 69 ml |
Container | Cartridge |
Datasheets (0)
Certificates/ Documents (34)
Collated nails and gas cartridge NG CS-2/3 HFB
Plastic-coated punched mounting strip
Collated nails and gas cartridge NG CS-2/3
High-performance gas unit DIGA® CS-3
Plastic-coated assembly tape
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Cable bracket W-KBB 935 plus Suitable for all Würth DIGA® CS devices
34° half-head collated nails AN
Collated nails and gas cartridge NG CS-2 HFB
Collated nails and gas cartridge NG CS-2/3 HD
DIGA® CS-3 high-performance gas-powered tool electrical set
Fuel cell For DIGA® WO-1/21, WO-1/34 and Paslode Impulse IM 350
Cable duct fastener W-KKB PLUS
Nail HN 101 For use in steel and concrete substrates
High-performance gas unit DIGA® CS-3 starter set 1,601 pieces
Dry wall screw with double-start thread
Plus Quadro-L hammer drill bit
Refuse bag Without pull tie
Cutting disc Speed for steel
Dry wall screw with double thread, collated
Fabric adhesive tape
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
W-RO 25 round plate
Nail anchor SHARK® Hammer TYPE FK
Stand connecting screw
ALG 18 V M-CUBE charger
Fabric mounting tape For indoor and outdoor use
18 V M-CUBE W-CONNECT Li-ion rechargeable battery
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
W-RO 13 round plate
