Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB
Cleaning brush for WIT-UH 300
CLNBRSH-(RB12)-MA-DRLHO12MM-ST-THRM8
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
For cleaning drill holes in concrete
- WIT-UH 300, Option 1
- WIT-UH 300, REBAR
- WIT-PE 1000, Option 1
- WIT-PE 1000, REBAR
With M8 connecting thread
- WIT-UH 300, option 1: European Technical Assessment ETA-17/0127
- WIT-UH 300, REBAR: European Technical Assessment ETA-17/0036
- WIT-PE 1000, option 1: European Technical Assessment ETA-19/0542
- WIT-PE 1000, REBAR: European Technical Assessment ETA-19/0543
Nominal drill hole diameter | 12 mm |
Suitable for anchor rod | M10 |
Suitable for rod diameter | 8 |
Outer diameter | 13.5 mm |
Length | 150 mm |
Filling length | 80 mm |
Connection thread | M8 |
Material of wire | Steel |
Datasheets (0)
Certificates/ Documents (0)
Cleaning brush with M6 WIT-RMB connecting thread
Handle For cleaning brushes
Machine chuck SDS-plus M8 SDS-plus M8 for REBAR cleaning brushes and WIT-RB cleaning brushes (Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)
Extension For cleaning brush with M8 connecting thread
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Blow-out pump for drill hole cleaning
Chemical injection mortar Concrete Multi WIT-UH 300
Hexagonal M6 machine chuck for concrete and masonry cleaning brushes
Set of hand brushes
All-rounder injectable mortar WIT-VM 250
Cleaning brush For masonry with M6 connecting thread
Extension For concrete and masonry cleaning brush with M6 connecting thread
Plus Quadro-L Vario hammer drill bit
Mixer nozzle extension WIT-MV
FILL & CLEAN static mixer
W-DSD insulation dowel with expansion nail
Metal cavity anchor W-MH/L pan-head screw
Piston plug WIT-VS for ensuring that mortar-filled drill holes contain no air bubbles
Mixer extension WIT-MV, flexible
Injectable mortar WIT-NORDIC
Lightweight construction anchor W-KL
Pneumatic air nozzle WIT-DD
Threaded connector For pneumatic air nozzles
Manual mounting pliers
Mixer nozzle for WIT-PE 500 and WIT-VM 250 cartridges
Setting tool SHARK ISO 50 and W-KL
Support plate for thermal-acoustic insulation panels W-DT
WIT-IG internally threaded sleeve, zinc-plated steel for WIT-VM 250 injection systems in masonry
WIT-IG internally threaded sleeve, A4 stainless steel for WIT-VM 250 injection systems in masonry
WIT-AS anchor rod, zinc-plated steel for WIT-VM 250 injection systems
