CERAfix 302 liquid foil

LIQUIDFILM-(CERAFIX-302)-GREY-20KG

Art.-no. 5875100302

EAN 4068362542862

All versions

Similar products

-,--
price per selected packing unit | Individual prices for customers after login

CERAfix 302 liquid foil

Art.-no. 5875100302

-,--
price per selected packing unit

Quantity

Show availability in Würth shop

Exclusively for trade customers

Locate shop
Login/Register
Call customer service: +49 7940 15-2400

Report incorrect product information here

Watertight, elastic, polymer dispersion-based sealing compound for compound sealing (AIV-F) for water impact classes W0-I and W1-I on floors and W2-I on walls in accordance with DIN 18534.

Certified quality

General test certificate from construction authorities

Fire behaviour classified in accordance with DIN EN 13501-1 and EN ISO 11925-2

Ready to use

Can be used directly from the container

No mixing required

Fast application

Extremely flexible

Very suitable for bridging cracks

Reliable even on surfaces subject to cracking and considerable movement

Quick drying

Reduces downtimes

Water vapour permeable and therefore also suitable for slightly damp substrates.

Solvent free

Can be applied with a brush, roller or joint knife

Our products featuring the EMICODE label are low in emissions/harmful substances. The EMICODE label classification system certifies the environmental and health compatibility of construction products, based on strict emission requirements from recognised institutes.

Proof of Performance

EMICODE EC1plus: Very low emission – the EMICODE classification system characterises the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

Notice

Do not allow water to make contact with surface until fully hardened! Not suitable for underwater applications.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. For further information, please refer to the technical data sheet.

Product residues can be disposed of in line with waste code AVV 08 04 10.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For quick, joint-free sealing under tiles and panels in indoor applications, such as bathrooms, showers and residential areas. CERAfix 302 is suitable for compound sealing for water impact classes W0-I and W1-I in accordance with ZDB information sheet "Verbundabdichtungen" (Compound sealing - only available in German) and on wall surfaces of water impact class W2-I (only on walls) in accordance with DIN 18534 Part 3.

Prime substrates according to their requirements.

Available in two different colours for quality control. Liquid seals must always be applied in two layers.

Instructions

The surface must be solid, load-bearing, clean, dry and free from separating substances. The material is applied with a brush or a roller. Before application, prime the surface with CERAfix 101, art. no. 5875100101. Apply an even layer of CERAfix 302 once the primer has dried. Reinforce the elastic surface seal by applying Würth CERAfix 310, art. no. 5875100310, in the wall/floor joint area. The tiles can be adhered directly to the CERAfix 302 once fully dried.

Contents	20 l
Chemical basis	Polymer dispersion with fillers
Min. processing temperature	5 °C
Max. processing temperature	30 °C
Min./max. processing temperature /conditions	5 to 30 °C / at 20°C and 65% relative humidity
Min./max. surface processing temperature	5 to 30 °C
Min. surface processing temperature	5 °C
Max. surface processing temperature	30 °C
Min./max. surface processing temperature /conditions	5 to 30 °C / at 20°C and 65% relative humidity
Min./max. processing temperature	5 to 30 °C
May be walked on after max.	16 h
May be walked on in following conditions	at 20°C and 65% relative humidity
Full resilience	28 d
Conditions for full resilience	at 20°C and 65% relative humidity
Can be covered after max.	1 d
Covering conditions	at 20°C and 65% relative humidity
Can be covered after (wall)	6 h
Application quantity in weight/area	1.2 kg/m²
Min. coating thickness	0.5 mm
Processing time	60 min
Viscosity/consistency	Creamy
Application conditions	at 20°C and 65% relative humidity
Solvent-free	Yes
Full load capacity/conditions	28 d / at 20°C and 65% relative humidity

Required accessory:

Product

Description

Quantity

Price
/PU

CERAfix 101 tile dispersion primer

PRIM-(CERAFIX-101)-10LTR

Art.-no. 5875100101

Solvent-free, ready-to-use dispersion-based universal primer for indoor and outdoor use.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Chemical cut protection glove W-310 Level D

Description:

Permeation level: 6

Very robust, liquid-proof protective glove that combines optimal cut protection with chemical protection

Household glove

Description:

Permeation level: 2

Liquid-proof, premium-quality cleaning glove made from natural latex

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Chemical protective glove PVC w. backing fabric

Description:

Permeation level: 5

Very robust, submersible PVC glove with cotton support fabric

Chemical protective glove made from chloroprene and latex

Description:

Permeation level: 3

Cotton flocking on the inside

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 6

Chemical protective glove chloroprene

Description:

Permeation level: 4

Heavy-duty design

Chemical protective glove nitrile with backing fabric

Description:

Permeation level: 6

Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort

Disposable nitrile glove

Description:

Permeation level: 2

Liquid-proof, food-safe disposable glove

Disposable nitrile grip glove

Description:

Permeation level: 2

Unique, diamond texture for optimal grip

Disposable glove Nitrile Grip Comfort

Description:

Permeation level: 4

Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside

Disposable gloves, nitrile, extra strong, type A

Description:

Permeation level: 5

Durable and robust disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.