CERAfix 101 tile dispersion primer
PRIM-(CERAFIX-101)-10LTR
Art.-no. 5875100101
EAN 4047376963245
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
Reduces substrate absorbency
- For priming low-absorbent and highly absorbent substrates.
- Prevents subsequent fillers or thin-bed mortars from drying out too quickly.
The good adhesive bond improves the adhesion of fillers and thin-bed mortars.
The deep-working action effectively binds fine dust.
Ready to use
- Can be used directly from the container
- No mixing required
- Fast application
- Fast drying
The blue colour makes it easy to see which surfaces have been treated.
Low odour
Solvent free
Suitable substrates
- Cement screeds (CT)
- Calcium sulphate screeds (CA, CAF)
- Magnesia screeds (MA)
- Concrete
- Dry screeds
- Cavity floors
- Floor-levelling compounds
- Tile backer boards
- Gypsum boards
- Gypsum fibreboards
- Cement and fibre cement panels
- Cement-based plasters, gypsum plaster, lime cement plaster, lightweight plaster
Fire behaviour classified in accordance with DIN EN ISO 13501-1: E
EMICODE EC1plus: Very low emissions: The EMICODE classification system distinguishes the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.
CERAfix 101 must be dry before the next coat is applied. Cover surfaces not to be treated (e.g. windows and doors) prior to application. Surface must not be sticky when further work is carried out! Do not work 'wet on wet'. Protect from frost.
Recognised technical regulations apply along with current standards and ZDB information leaflets.
EMICODE EC1plus: Very low emissions: The EMICODE classification system distinguishes the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Leftover product can be disposed of in line with waste code AVV 08 01 20.
Datasheets(X)
CERAfix 101 is used to prime highly absorbent and non-absorbent substrates made from cement and gypsum materials, concrete, plaster, masonry etc. CERAfix 101 improves adhesion, bonds construction dust and solidifies the substrate. Reliably reduces substrate absorbency to prevent the rapid extraction of water from fillers and tile adhesives. CERAfix 101 is used as a system primer for CERAfix seals, fillers and levelling compounds and for tile adhesives in indoor and outdoor applications.
GISCODE: D1 drying time approx. 15-45 minutes depending on the substrate.
The substrate must be solid, load bearing, clean, dry and free from adhesion-impairing substances and continuous cracks. Apply the material using a brush or fine-pore foam roller. Material consumption approx. 30-100 g/m2. Avoid over-saturating the substrate or creating puddles of material. Allow CERAfix 101 to dry fully before carrying out further work. Drying time approx. 15-45 min.
Colour | Light blue (bright blue) |
Weight of content | 10 kg |
Contents | 10 l |
Density | 1 g/cm³ |
Viscosity/consistency | Liquid |
Can be covered after max. | 3 h |
May be walked on after min./max. | 60-90 min |
May be walked on in following conditions | at 20°C and 65% relative humidity |
Drying time | 3 h |
Conditions for drying time | at 23°C and 50% relative humidity |
May be walked on after max. | 90 min |
Min./max. processing temperature | 5 to 30 °C |
Solvent-free | Yes |
Min/max. application quantity in weight/area | 100-200 g/m² |
Min. application quantity in weight/area | 100 g/m² |
Max. application quantity in weight/area | 200 g/m² |
Application quantity conditions | depending on the absorbency of the surface |
Shelf life from production | 15 Month |
Conditions to maintain shelf life from production | storage in a dry place protected from light, 5°C to 40°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!