A/C leakage stop additive For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units
Air-conditioning leak stop additive
SEAL-A/C-LEAKSTOPADDITIVE-30ML
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
TCP reduces wear
- Longer compressor service life
- Improves the compressor service life
- Reduces noises developing in the compressor
- (Tri-cresyl-phosphate) Additive specifically developed for vehicle air-conditioning compressors for reducing mechanical wear (friction) in the compressor (piston etc.)
Compatible with PAG and ester oil
Not suitable for sealing leaks on metallic components (evaporator, compressor, condenser etc.).
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.
Connect the A/C leakage stop additive to the adapter, insert into the application gun and mix in via the high-pressure side of the cooling system (engine must be switched off).
Contents | 30 ml |
Smell/fragrance | Odourless |
Chemical basis | Methylene diphenyl |
Water-soluble | Yes |
Vapour pressure | 1.33 Pa |
Conditions for vapour pressure | at 20°C |
Colour | Light yellow transparent |
Min. flashing point | 255 °C |
Density | 1.02 g/cm³ |
Viscosity/consistency | Liquid |
Shelf life from production | 48 Month |
Datasheets (1)
Services und Systeme rund ums Produkt
Air-conditioning leak stop Plus
Adapter for topping up leak stop additive
A/C leak detection additive
Air conditioning disinfectant spray
Basic UV leak detection additive
Air-conditioning refrigerant R134 a
Air conditioning leak detection assortment For mobile use on R134a air-conditioning systems
A/C leak detection additive
Air-conditioning refrigerant R1234yf
Radiator leak detection additive
EVAPOmat® air conditioner cleaning device set
Adapter for topping up leak detection additive
A/C system cleaner
Electronic refrigerant leak detector
Radiator sealant HP
Engine wash
Universal cleaner R1
Copper paste CU 800
Silicone acetate bathroom unit
Paint spray, silk gloss
Active glass cleaner
Bond and Seal Power structural adhesive
Multigrade compressor oil Pro
Engine protective lacquer
Paint spray, high gloss
Contact spray Oxidation solvent
Copper spray CU 800
Heat-resistant paint spray
High-temperature silicone
Leak detector Plus
Leak detector Plus
Adapter for topping up leak stop additive
Electronic refrigerant leak detector
Leak detection technology Nitrogen pressure reducer
Adapter for topping up leak stop additive
Application gun For air-conditioning leak detection additive
A/C leak detection additive
A/C leak detection additive
Premium UV leak detection additive
POE oil POE 100
Basic UV leak detection additive
PAG oil Premium
PAG oil Premium
Air-conditioning leak stop Plus
