Sadece üç adımda kaydolabilir ve Online-Mağazanın tüm fonksiyonlarını kullanabilirsiniz.
Sadece kurumsal müşterilere satış yapılır
QR kodu artık geçerli değil. Tekrar etkinleştirmek için lütfen aşağıdaki düğmeye tıklayın.
Sıralama
322 sürümlü 25 ürün bulundu
For finishing steels of medium to high strength (construction steels, case-hardened steels, tempering steels), non-ferrous metals, rust and acid-resistant steels with high cutting performance yet excellent surface properties. Especially for synchronous milling.
Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and sequent straight milling and clearance grooving.
Recommended for milling materials of average to high strength up to approx. 1,300 N/mm². For drilling and subsequent straight milling, particularly suitable for contour milling.
Recommended for milling materials of average to high strength. Milling of grooves with greater drill depth, precision clearances, suitable for both front and circumferential milling. High cutting performance and excellent smooth running produce optimal surface quality.
Particularly suitable for machining aluminium materials (both for cast and wrought alloys). Core increase for greater stability, optimal chip outflow owing to enhanced production grinding procedure for an extremely smooth surface. Maximum cutting volumes and optimal surface quality owing to unique cutter geometry.
Recommended for milling materials of average to high strength. Drilling to full depth and straight milling with precision clearances.
Recommended for cutting medium to high-strength materials. For cutting grooves with deeper drilling depth, precision clearances, also suitable for end and circumference milling. High machining output and very smooth running result in excellent surface finishes.
Particularly suitable for steel materials from 500-1,400 N/mm², stainless steels, grey cast iron and titanium. High cutting performance with low driving power = MTC.
Particularly suitable for all steel materials up to 1,400 N/mm², higher-strength stainless steels, grey cast iron and short-chipping aluminium materials and cast aluminium. High cutting performance.
With reinforced shank. Universal range of applications for materials of medium to high strength (approx. 900–1,400 N/mm²). E.g. case-hardened steels, tempering steels, tool steel (alloyed/tempered), non-ferrous metals, highly heat-resistant materials and cast irons and cast alloys.
Recommended for milling materials of medium and high strength and for HSC machining.
Daha fazla arama sonucu var. Daha kesin bir sonuç için girişlerinizi lütfen daha sınırlı hale getiriniz.
Lütfen bunu kontrol edin ya da farklı bir arama terimi kullanın.
Darbeli matkap ucu Plus Quadro-L Vario
Zımpara eğesi için keçe zımpara şeridi
Ahşap zımpara kağıdı, rulo, KPC/KPE
Helezon matkap ucu HSS DIN 338 tip RN 118°
Helzn mtk ucu HSS DIN 338 tip RN ZEBRA 82 pr Sysko
Helezon matkap ucu ürün gamı HSS DIN 338 tip RN 118°
Helezon matkap ucu HSS DIN 338 tip RN 130°
Sentetik korindon flap diskler
Chamfer mill
Dörtlük kesicili
End mill for hard machining
HPC end mill
HSC end mill
Karbür parmak freze
Kontur freze
Küresel uçlu freze
Tek dişli freze
Trochoidal end mill
