pias® drilling screw, round head with collar and AW drive
pias steel zinc plated pan head AW with flange
SCR-DBIT-PANHD-FLG-AW25-(A3K)-5,5X25
ZEBRA PIAS
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Drilling, threading, screwing-in - all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
AW drive system:
- Enhanced torque transmission
- Longer service life
- Optimum centring
- Better mounting output thanks to fatigue-free screwing in; the required contact pressure for transmission of the torques is considerably lower
- Largest possible contact surface of bit in screw drive
- Even force distribution prevents damage to the surface-protection coating and therefore ensures better resistance to corrosion
- The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks
- Contact pressure during use approx. 100 N/screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected.
For fasteners with a construction approval, the approval, and in particular Part 2 "Special regulations", must always be observed.
The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.
 | |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 5.5 mm |
Length (l1) | 25 mm |
Head diameter (dk) | 14.0 mm |
Head height (k1) | 3.9 mm |
Drill tip length (lp) | 5.7 mm |
Other standard | Company standard |
Head type | Pan head with collar |
Internal drive | AW25 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Min. recommended substructure thickness | 2.0 mm |
Max. material thickness to be drilled through (metal) | 5.3 mm |
Max. attachment thickness (lB) | 14 mm |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Services und Systeme rund ums Produkt
pias® drilling screw, flat head with AW drive
Drilling screw, round head with collar and H cross recess pias®
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
pias® drilling screw, countersunk head with AW drive
Cable tie KBL 1 made of polyamide with plastic tongue
pias® drilling screw, round head with collar and AW drive
pias® drilling screw, flat head with AW drive
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Amo® III 7.5 type 2 window frame screw Cylinder head 8.0 mm
Amo® III 7.5 type 3 window frame screw Half round head
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Drilling screw, mushroom head Steel, zinc-plated, blue passivated, AW drive
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
VKP® PLUS sealing tape
ASSY® 3.0 zinc-plated blue chipboard screw
Flat washer For hexagon head bolts and nuts
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 130°
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Electrical insulating tape
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
Crepe masking tape
Window construction screw, raised countersunk head FBS
ASSY® 3.0 zinc-plated yellow chipboard screw
Crimp cable lug, ring connector PVC-insulated
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
