pias® drilling screw, flat head with AW drive
pias steel zinc plated pan head AW
SCR-DBIT-PANHD-AW20-(A3K)-3,9X13
ZEBRA PIAS
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Assembly time reduced by at least 50 % using the drill tip
- Drilling without centre-punching
- Thread forming
- Fastening
all in one operation
Additional optimal torque transmission by the AW drive
Suitable for component combinations tI/tII in accordance with approval ETA-10/0184
- Steel/steel for dia. 4.2 mm, 4.8 mm and 5.5 mm
- Contact pressure during use approx. 100 N, screw in with depth stop if necessary.
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected. For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Head type | Pan head |
Drive type | AW |
Thread type | Self-tapping screw thread |
Shape of tip | Drilling tip |
Underground | Steel, Aluminum |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 13 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 3.1 mm |
Drill tip length (lp) | 4 mm |
Screw-thread length with drill tip | 10.5 mm |
Internal drive | AW20 |
Min. recommended substructure thickness | 1.5 mm |
Max. material thickness to be drilled through (metal) | 3.0 mm |
Min./max. attachment thickness | 1.5-6.5 mm |
Min./max. recommended installation speed (idling) | 1700-2500 rpm |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Cable tie KBL 1 made of polyamide with plastic tongue
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
pias® drilling screw, countersunk head with AW drive
pias® drilling screw, raised countersunk head with AW drive
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
pias® drilling screw, round head with collar and AW drive
pias® drilling screw, flat head with AW drive
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Wood screw Hexagon head DIN 571, steel zinc-plated blue
WÜPOFAST® zinc-plated blue chipboard screw
pias® drilling screw, round head with H recessed head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
ASSY® 3.0 zinc-plated blue chipboard screw
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Electrical insulating tape
Washer with large outside diameter DIN 9021 (with large outside diameter), A2 stainless steel, plain
Nylon anchor For light loads (secondary attachments)
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Twist drill bit HSS DIN 338 type RN 118°
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Clip, metric
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Plastic multi-purpose Zebra Shark® anchor without collar
Neutral silicone Perfect
ASSY® 3.0 zinc-plated yellow chipboard screw
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Bit set with metal belt clip 17 pieces
4 in 1 metric ratcheting double box-end wrench With POWERDRIV® drive
Allen key set, hexagon socket 9 pieces
Industrial Cleaning Wipes
Hand cartridge gun high-quality
Neutral silicone Perfect
Stainless steel cleaning cloth
Blind rivet, flat head
Blind rivet attachment For processing aluminium, steel and stainless steel blind rivets 2.4-5.0 mm in diameter
