Welcome to Würth Germany For trade customers only Contact +49 7940 15-2400

Wire cable spray

Wire cable spray
WRECBLLUB-SPR-500ML

Art.-no. 08931058
EAN 4038898075967
-,--
price per selected packing unit
| Individual prices for customers after login

Show availability in Würth trade store
Exclusively for trade customers

Register now and access more than 125,000 products

Protective wax with OMC2 for lubricating and preserving

Does not drip as heat increases


Ideal for areas exposed to direct sunlight



Optimal creep properties


  • Good penetration of lubricating wax in very tight spaces

  • Lubricates hard-to-reach areas


Outstanding resistance to water


  • Ideally suited for outdoor use

  • Protects against moisture and water

  • Excellent corrosion protection


Contains additives with OMC 2 technology


  • Improved lubricating film

  • Longer-lasting rust protection

  • Low wear

  • Longer service life


Silicone, resin and AOX-free



Free from solid lubricants



Compatible with Viton and nitrile butadiene rubber elastomers

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

High-quality protective wax with OMC 2 technology, for lubrication and preservation

Instructions

Thoroughly pre-clean the parts with a brake cleaner. Spray evenly. Repeated application provides a thick protective film.

Chemical basis

Synthetic wax oxidant

Colour

Brown

Smell/fragrance

Characteristic

Density

0.775 g/cm³

Density conditions

at 20°C

Min. temperature conditions

-40 °C

Max. temperature conditions

120 °C

Corrosion protection period/category

No rust spots after 7 cycles

Corrosion protection period conditions

in accordance with DIN 51802

Behaviour in the presence of water

0-90

Conditions for behaviour in the presence of water

in accordance with DIN 51807-1

Resin-free

Yes

Silicone-free

Yes

AOX-free

Yes

Contents

500 ml

Shelf life from production

24 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information