Upgrade set for the Original Prusa XL
SP-UPGRADE-PRUSA-XL-2TO5TOOLHEADS
Art.-no. 4954628342
EAN 4068362346651
-,--
price per selected packing unit | Individual prices for customers after login
price per selected packing unit | Individual prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7940 15-2400.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Practical upgrade set for upgrading the Original Prusa XL 3D printer from two to five tool heads
Scope of delivery
XL Dual-Tool Nextruder upgrade from two tool heads to five tool heads
- 3x XL Multi-Tool Nextruder (with 0.4 mm nozzle)
Including spool holder and Prusa Nextruder sock
- 1x XL electronic expansion set
- XL splitter board
- Additional power supply
- 2x 0.4 mm nozzle (for existing Nextruders)
2 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Product information
Datasheets(X)
Application area
- Install one of the upgrade packages to increase the number of available tool heads and expand your 3D printing options.
- Additional extruders allow you to combine different materials and print in multiple colours with little to no waste.
Instructions
To upgrade the XL with additional print heads, make sure that you have the tools listed below available. These are part of the Original Prusa XL package and should already be at your disposal.
Tools required for installation
- Mini wrench - used to calibrate the dock and can be replaced with a small slotted screwdriver if required
- Universal wrench - used to calibrate the dock
- PH2 screwdriver - a standard PH2 screwdriver is required for the clamping screws
Needle-nose pliers - T10 key - at least 71 mm long
- 2.5 mm hex key - at least 86 mm long, as thin as possible due to space limitations
- 3.0 mm hex key - at least 128 mm long
Manufacturers | Prusa |