Superglue Super-fast glue

Cyanoacrylate structural adhesive, Klebfix

Art.-no. 0893090

Prices for customers after login

Superglue Super-fast glue

Art.-no. 0893090

Prices for customers after login



x1 pcs
Show availability in Würth trade store

Exclusively for trade customers

Register now and access more than 125,000 products

For bonding metal, plastic and rubber parts with and to each other in a matter of seconds.

Clever special closure

  • Precise dispensing

  • The tips do not become clogged

Bonds in seconds

  • Immediate further processing possible

  • Fast repairs

  • Simple designs without additional fastening materials possible

High level of resistance to ageing and climatic conditions

Solvent and silicone-free

  • It is advisable to wear safety gloves and safety goggles.

  • If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.

  • Due to the vapour pressure of the liquid adhesive, slow curing excess product around the adhesive area may result in a white deposit (blooming effect). These are adhesive vapours that are hardening. These can be removed with e.g. isopropanol or acetone. However, it is important to note that the surfaces of the parts to be cleaned are also resistant to these solvents. Blooming can be prevented/reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.

NSF registered, class P1, reg. no. 151993

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application area

Suitable substrates are aluminium, copper, steel/iron, rubber, all common types of elastomer (solid or foam rubber), in particular for SBR, EPDM, GFRP, EPDM, polycarbonate etc. as well as cork, artificial and natural stones, enamels, glass, mirror, porcelain and ceramic.


The parts to be adhered must be clean, free from grease and dry.

Apply a thin, even layer of adhesive to just one of the surfaces to be adhered. Apply sufficient pressure to make the connection immediately, in order to ensure complete contact.

Use the activator to speed up the reaction of Würth superglues. This can usually be used on all kinds of substrates, but please test it beforehand on a concealed section for compatibility.

Chemical basis

Cyanoacrylate acidic ester




1.06 g/cm³

Min./max. hardening time /conditions

2-90 s / Depending on the material

Min. combined tension and shear resistance

8 N/mm²

Stretch capacity

2 %

Max. gluing gap size

0.1 mm

Min./max. temperature resistance

-30 to 80 °C

Min./max. processing temperature

5 to 35 °C





Shelf life from production/conditions

12 Month / at room temperature

Weight of content

50 g

Additive article:



To accelerate the curing of superglues
x 1 pcs
Assembly glove Comfort


Lightweight, breathable fine assembly glove
x 5 pcs
Disposable nitrile glove


Liquid-proof, food-safe disposable glove
x 100 pcs
Primer for superglues


For improving adhesion of hard-to-glue plastics
x 1 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:

Information on price and image display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units


The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Permeation level: 3
Long, heavy-duty design
Nitrile chemical protective glove
Nitrile chemical protective glove
Permeation level: 2
Cotton velour lining
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
≥ 10 min
≥ 30 min
≥ 60 min
≥ 120 min
≥ 240 min
≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Flip catalog


Datasheets ()

CAD Data  | 




Technical information