Sealing tape VKP® PLUS

Sealing tape, VKP PLUS

Art.-no. 087501102

Prices for customers after login

Sealing tape VKP® PLUS

Art.-no. 087501102

Prices for customers after login



x30 pcs
Show availability in Würth trade store

Exclusively for trade customers

Register now and access more than 125,000 products

High-quality, waterproofed, pre-compressed BG1 sealing tape for secure and permanent joint sealing up to over 600 Pa

Tested sealing properties over 600 Pa, BG1 and BGR in accordance with DIN 18542:2020-04

Tested and certified resistance to driving rain by complying with the necessary test parameters.

A product from the Würth Sealing System

The individual product components from the Würth Sealing System are matched to each other with regard to material compatibility.

Excellent ecological compatibility

Tested ecological safety according to GEV test method (class EC 1 PLUS).

Solvent-free and EMICODE EC1 plus

Safe to humans and the environment

Bridging of large joint differences that will withstand driving rain

Due to the tape's large tolerance, component movements can be compensated and common construction tolerances can be bridged more effectively. This reduces the number of tape sizes used.

Water-repellent, yet permeable to water vapour

When compressed accordingly, the tape seals against driving rain; however, due to its permeability to vapour, it provides excellent compensation of moisture.


The reset times are not subject to a certain specification and are only based on empirical values. They are dependent on the storage time and the storage and processing temperature. The longer the storage times and the lower the processing temperature, the longer the reset times.

Resistance to UV and weathering can only be ensured if installation is performed such that it will withstand driving rain.

Joint sealing connection systems according to ift certification program QM360: 2014, reg. no. 188 7050098

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Application area


The pre-compressed, one-sided self-adhesive VKP Plus sealing tape seals joints reliably and permanently. After the compression is released, the sealing tape develops a resilience that presses firmly against the joint edges and compensates for uneven areas of the joint. Depending on the installation period, the non-adhesive side develops a slight anchoring on the adjacent building material.

In construction:

Expansion joints, seals between prefabricated components, window and door connections, partition walls.

General industry:

Container construction, air-conditioning system construction, machine and apparatus construction etc.

  • Clean the joint/surface of oil, grease and loose material

  • Remove the cover paper from the sealing tape

  • Affix the sealing tape to the surface, or lay directly from the roller into the joint and lightly press into place

  • Cut off approx. 2 cm from the beginning and end of the tape

  • Lay the tape so that it is blunt; do not lay around corners

  • Take the additional length of approx. 2 cm/m into account when cutting the tape to length

  • Sealing function cannot be guaranteed in conditions with standing water

  • Please observe the specified joint width. Only by doing so can resistance to driving rain and UV be guaranteed.



Chemical basis

Fine open-cell polyurethane foam


10 mm

Min./max. joint width for watertightness in driving rain

2-3 mm

Length of roll

12.5 m

Min. resistance against driving rain (pressure)/conditions

600 Pa / in accordance with DIN 18542-BG1

Building material class/conditions

B1 / in accordance with DIN 4102

Max. water-vapour diffusion resistance factor value µ


Ultraviolet resistance

Yes, when installed to be resistant to driving rain

Min./max. temperature resistance

-30 to 90 °C

Shelf life from production

24 Month

Conditions to maintain shelf life from production

at 5°C to 25°C

Art.-no. Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Flip catalog


Datasheets ()

CAD Data  | 




Technical information