Screwdriver PH striking cap with hexagon shank
Screwdriver PH hexagon blade impact cap
SCRDRIV-PH2X100
ZEBRA
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Powerful shank
- Large striking cap on the handle end enables striking and chiselling
- Extremely robust, continuous, brushed chrome-plated hexagon shank
- Improved power transmission due to the matt nickel-plated, tempered hex bolster for open-end wrenches on the shank
- Quick identification of the right size using the Würth colour code on the shank
- Black point tip for the best possible fit in the screw
- Tip finished according to the DIN 5260-PH and ISO 8764-PH standards for PH screwdrivers
More than just a handle
- Fatigue-free working with the 2C handle with hard core and soft, non-slip surface
- Fast-turning zone and hard material in the lower part of the handle enable quick turning using the index finger and thumb once the screw is loosened
- Quick and easy identification with the shank symbol and size printed on the handle
 | |
Tip size | PH2 |
Blade length (A) | 100 mm |
Handle length (B) | 106 mm |
Handle width (C) | 35 mm |
Width across flats, screwdriver blade | 6 mm |
Wrench aid | 10 mm |
Datasheets (0)
Certificates/ Documents (0)
Services und Systeme rund ums Produkt
Screwdriver slotted striking cap with hexagon shank
PH screwdriver With round shank
Pozidriv screwdriver (PZ) with hexagon shank
Screwdriver set 5 pieces
Screwdriver PH 3C handle with hexagon shank
Screwdriver PH short with round shank
TX screwdriver with round shank
Slotted screwdriver with hexagon shank
Metric combination wrench with POWERDRIV®
Screwdriver slotted 3C handle with hexagon shank
Screwdriver slotted slim With round shank
PH screwdriver with hexagon shank
Slotted screwdriver with round shank
Screwdriver PZ 3C handle with hexagon shank
Slotted screwdriver With hexagon shank
1/2 inch socket wrench insert metric, hexagon, short
Cable tie KBL 1 made of polyamide with plastic tongue
C 6.3 TX bit (1/4 inch)
Twist drill bit HSS DIN 338 type RN 118°
High Power battery
Machinist's hammer German design in accordance with DIN 1041
Wire brush With wooden body
Flat washer For hexagon head bolts and nuts
Metric double open-end wrench DIN 3110/ISO 1085
1/4 inch extension
1/2 inch extension
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Water pump pliers DIN ISO 8976
VDE screwdriver, flat slotted
Twist drill bit HSS DIN 338 type RN 130°
