STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades

Name: STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
Brand: Würth
SKU: 0893700130

Adhesive, STAMCOLL AS
ADH-ROOFSHT-(STAMCOLL-AS)-310ML

Art.-no. 0893700130

EAN 4053479082516

All versions

Specification

For bonding Stamisol overlaps and connecting to roofs and façades

Very good adhesion without primer on many substrates – even under water load

Good resistance to weathering and ageing

Suitable for indoor and outdoor use

Fast curing even with high layer thicknesses

Permanently elastic – for stress-equalizing bonding and dynamic loads

Almost odourless

Excellent resistance to chemicals and heat

Free of solvents, isocyanates, silicone

Repaintable, resprayable

Notice

Before using the adhesive/sealant, the user should ensure that the materials in the contact area (solid, liquid and gaseous) are compatible with the adhesive/sealant and do not damage or change them (for example discolour). For construction materials that are subsequently processed in the area of the adhesive/sealant, the user should check in advance that their ingredients or vapours cannot lead to any impairments or changes (e.g. discolouration) of the adhesive/sealant. Where appropriate, the user should consult the respective manufacturer of the construction materials.

This information is only a recommendation based on our experience. Preliminary testing required!

Application

Application area

Stamisol adhesive/sealant STAMCOLL AS from the cartridge

is a high-quality, single-component adhesive/sealant based on silane-terminated polymers

Hardens by reaction with moisture

Instructions

Compatibility: Inks, paints, plastics and other coating materials must be compatible with the adhesive sealant.

Cleaning: The application surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesive/sealants or other adhesion-inhibiting substances must be removed.

Cleaner for non‐porous surfaces: Cleaning should be carried out with acetone cleaner (art. no. 0893 460, 0893 460 002) or IPA cleaner (art. no. 0893 223 500; 0893 223 505) and a clean, lint-free cloth (art. no. 0899 810).

Avoiding air pockets: To achieve optimum adhesion and good mechanical properties, the inclusion of air must be avoided. Due to the large number of possible influences during processing and application, sample processing and application must be carried out by the user. The specific use by date can be found on the container and must be observed.

Technical information

Chemical basis	MS hybrid polymer
Colour	Black
Density/conditions	1.38 g/cm³ / at 23°C, 50% relative humidity
Full curing speed	2 mm/d
Min. curing time	0 s
Fully hardening/curing conditions	23°C and 50% relative humidity
Min./max. temperature resistance	-40 to +90 °C
Shelf life from production/conditions	9 Month / at 23°C and 50% relative humidity
Contents	310 ml