SMP adhesive HIGH TACK

SMP adhesive High Tacks

Art.-no. 0893237140

Prices for customers after login

SMP adhesive HIGH TACK

Art.-no. 0893237140

Prices for customers after login



Show availability in Würth trade store

Exclusively for trade customers

Register now and access more than 125,000 products

Structural adhesive with extreme initial SMP-based bonding

Extremely high initial bonding (High Tack)

  • Does not slip when applied vertically

  • No additional fixing necessary

Permanently elastic adhesive joint

  • Smooths out unevenness and material stresses

  • Absorbs acoustic and mechanical vibrations

Universal applications indoors and outdoors

  • Perfect adhesion, largely without primer, to most including moist surfaces

  • Good UV stability and weathering resistance outdoors

  • Can be painted over after fully drying

  • Not corrosive to metals

High final tensile strength

Waterproof and saltwater-proof

Solvent- and silicone-free


Not suitable for expansion joints and natural stone.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Suitable for bonding in the construction and metals industries, assembly bonds, vehicle and caravan construction, vehicle superstructures, machine and container construction, glass bonding in furniture and display case construction, solar and wind power plants, various industrial areas, apparatus and plant construction etc.

E.g. bonding of door frames, windowsills, corner profiles, sheets, panels, floor panels, cable ducts, stair construction, laminate laying, trim strips, signpost attachment, wood constructions, insulation materials.


The application surfaces must be solid, clean, dry and free from grease and oil. Cut off thread cap, screw on nozzle and cut to the required strand width. Apply the adhesive using a suitable application gun. Apply adhesive in vertical beads at a distance of 10 cm to 20 cm. Place the work pieces in the correct position within the skin formation time and press these together to ensure that the thickness of the adhesive between the material and surface is at least 2 - 3 mm. Do not apply the adhesive in dots! Due to the high initial strength, fixing is not normally required during hardening. Reseal the opened cartridge so that it is airtight. Remove any adhesive that has escaped while it is still fresh. Cleaning hardened adhesive can only be done mechanically.


290 ml





Chemical basis

Silane modified polymer

Full curing speed/conditions

3 mm/d / 23°C and 55% relative humidity

Min. tensile strength

2.2 N/mm²

Min. combined tension and shear resistance

1.5 N/mm²

Min. breaking elongation

335 %

Min./max. processing temperature

5 to 40 °C

Min./max. temperature resistance

-40 to 90 °C

Shelf life from production/conditions

18 Month / at 5°C to 25°C









Additive article:

Cartridge cutter


For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle
x 1 pcs
Surface cleaner Activating Cleaner


Surface optimisation of non-porous surfaces
Manual cartridge gun, high-quality


For applying 310 ml cartridges
x 1 pcs
Special cartridge nozzle V-Cut


Application nozzle with V-cut specially for adhesives
x 25 pcs
Application nozzle Standard


For 310 ml plastic cartridges (coarse thread)
x 25 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:

Information on price and image display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units


The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Hazardous Material

Product information

Würth Catalogue

Catalogue page as PDF  | 

Flip catalog


Datasheets ()

CAD Data  | 




Technical information