SMART STEP EU+ HSS twist drill bit assortment DIN 338 25 pieces

Name: SMART STEP EU+ HSS twist drill bit assortment DIN 338 25 pieces
Brand: ZEBRA SMART STEP
SKU: 0624910025

Twist drill bit SMART STEP EU+ HSS DIN 338 25 pcs
DRL-MET-SET-HSS-DIN338-SMARTSTEP-(D1-13)
ZEBRA SMART STEP

Art.-no. 0624910025

EAN 4099618279829

All versions

Specification

The original SMART STEP twist drill bit with patent-pending stepped drill bit tip geometry with extremely uneven pitch (from dia. 2.5 mm) for even faster, more comfortable drilling with unrivalled precision and service life. Available in the ORSY® system cassette.

Extremely unequal pitch (EU+)

Up to 50 % longer service life

Significantly more comfortable drilling with less vibration, even less effort required and perfect tool guidance (up to 60 % less torque)

Up to 20 % lower energy consumption

Up to 15 % faster drilling progress

Precise, circular drilling in a wide range of materials including wood, plastic and acrylic, without tearing or splintering

Extremely comfortable drilling

Precise tapping without running off centre

Simple boring or enlarging of an existing drill hole

Angled drilling possible

No rattling or catching - even in thin-walled material

Burr-free hole exit

Significantly faster and more energy-efficient drilling compared to conventional HSS twist drill bits

Ideal for drilling out rivets and stud bolts

3-flat shank (from dia. 4 mm)

No spinning in the drill chuck: faster, more comfortable working

Optimal power transmission

Protects the drill chuck from damage

Little effort required to loosen and tighten the drill chuck

Available exclusively from Würth

Compact and practical system cassette suitable for the ORSY® system with useful features such as stackability, optimised joint and simple opening

Notice

For blind holes, please note the extended drill tip (see dimension l3)!

The steps of the innovative point geometry drill gradually to achieve the required diameter. To achieve this, the chip is broken into small individual chips by several main cutting edges, thus ensuring optimal chip removal. The result is highly precise, circular drilling.

The use of several cutting edges at the same time enables very fast, comfortable working and a long service life.

Application

Application area

Ideal for use in cordless drills as well as on hand-held, box column and pillar drills

For use in steel up to 1,000 N/mm², cast iron, aluminium, copper, brass, bronze, hard and soft wood, plastic (e.g. acrylic glass, HPL, screen printing plates) and composite materials (e.g. plastic profiles with steel core)

High drill hole quality and significantly longer service life compared to conventional twist wood drill bits.

Perfect for rivet holes, drilling out stud bolts, drilling sheet metal and thin-walled profile materials (e.g. aluminium/window profiles) and for drilling on round and sloping surfaces, such as pipes.

Ideal for high-precision, comfortable and fast working in solid materials (e.g. in steel with strength of up to 1,000 N/mm², aluminium and plastics).

Ideal for large drill hole diameters

Technical information

Number of pieces in assortment/set	25 PCS
Quality	ZEBRA-Premium
Standard / drilling depth	DIN 338 / 5xD
Shank style	3-face shank
Material to be processed	Steel, Cast iron, Non-ferrous metal, Wood, Hardwood
Material of sub-group	General structural steels, Non-alloyed tempering steels, Cast iron, Ductile iron, Malleable cast iron, Magnesium alloys, Copper, low-alloyed, Brass, long-chipping, Brass, short-chipping, Plastics, thermoset, Plastics, thermoplastic, Aluminium, Aluminium (<10% silicon), Aluminium wrought alloys, Aluminium casting alloys (<10% silicon), Tool steels
Surface	Multiple refined
Cutting material	HSS
Suitable for drill (points system)	4 of 4 points
Suitable for cordless drills (points system)	4 of 4 points
Suitable for upright drilling machine (points system)	4 of 4 points
Service life (points system)	3 of 4 points
Drilling speed (point system)	4 of 4 points
Bore hole quality (point system)	4 of 4 points
Versatility (points system)	3 of 4 points
Drilling behaviour (point system)	4 of 4 points
Self-centring	Yes

For dia. 16.0-20.0
Material designation	Tensile strength			from dia. 16.0						from dia. 20.0
				≤ dia. 8			> dia. 8			≤ dia. 10			> dia. 10
		v_c		n		f	n		f	n		f	n		f
		from	to	from	to		from	to		from	to		from	to
General structural steels	≤ 850 N/mm²	18	27	716	1074	0,03	358	537	0,04	573	859	0,035	286	430	0,042
Unalloyed hardened steels	≤ 850 N/mm²	18	27	716	1074	0,03	358	537	0,04	573	859	0,035	286	430	0,042
Low-alloy hardened steels	≤ 850 N/mm²	18	27	716	1074	0,03	358	537	0,04	573	859	0,035	286	430	0,042
Unalloyed hardened steels	≤ 1,000 N/mm²	15	23	597	915	0,028	298	457	0,038	477	732	0,031	238	366	0,04
Low-alloy hardened steels	≤ 1,000 N/mm²	15	23	597	915	0,028	298	457	0,038	477	732	0,031	238	366	0,04
Alloyed hardened steels	≤ 1,200 N/mm²	10	15	398	597	0,028	199	298	0,038	318	477	0,031	159	238	0,04
Nitriding steels	≤ 1,200 N/mm²	10	15	398	597	0,028	199	298	0,038	318	477	0,031	159	238	0,04
Tool steels	≤ 1,200 N/mm²	10	15	398	597	0,028	199	298	0,038	318	477	0,031	159	238	0,04
High-speed steels	≤ 1,200 N/mm²	10	15	398	597	0,028	199	298	0,038	318	477	0,031	159	238	0,04
Cast iron	≤ 350 HB	15	23	597	915	0,028	298	457	0,038	477	732	0,031	238	366	0,04
Nodular graphite and malleable iron	≤ 350 HB	15	23	597	915	0,028	298	457	0,038	477	732	0,031	238	366	0,04
Aluminium	≤ 600 N/mm²	35	45	1393	1791	0,03	696	895	0,04	1114	1433	0,035	557	716	0,042
Thermosetting plastics		15	23	597	915	0,03	298	457	0,04	477	732	0,035	238	366	0,042
Thermoplastic plastics		15	23	597	915	0,03	298	457	0,04	477	732	0,035	238	366	0,042
Soft and light wood		21	30	836	1194	0,033	418	597	0,044	668	955	0,038	334	477	0,046
Compact and hard wood		18	27	716	1074	0,032	358	537	0,041	573	859	0,036	286	430	0,043

For dia. 10.0-12.5
Material designation	Tensile strength			from dia. 10.0						from dia. 12.5
				≤ dia. 6			> dia. 6			≤ dia. 6.5			> dia. 6.5
		v_c		n		f	n		f	n		f	n		f
		from	to	from	to		from	to		from	to		from	to
General structural steels	≤ 850 N/mm²	18	27	955	1433	0,027	573	859	0,035	881	1322	0,027	458	687	0,038
Unalloyed hardened steels	≤ 850 N/mm²	18	27	955	1433	0,027	573	859	0,035	881	1322	0,027	458	687	0,038
Low-alloy hardened steels	≤ 850 N/mm²	18	27	955	1433	0,027	573	859	0,035	881	1322	0,027	458	687	0,038
Unalloyed hardened steels	≤ 1,000 N/mm²	15	23	796	1220	0,025	477	732	0,031	734	1126	0,025	382	585	0,035
Low-alloy hardened steels	≤ 1,000 N/mm²	15	23	796	1220	0,025	477	732	0,031	734	1126	0,025	382	585	0,035
Alloyed hardened steels	≤ 1,200 N/mm²	10	15	530	796	0,025	318	477	0,031	489	734	0,025	254	382	0,035
Nitriding steels	≤ 1,200 N/mm²	10	15	530	796	0,025	318	477	0,031	489	734	0,025	254	382	0,035
Tool steels	≤ 1,200 N/mm²	10	15	530	796	0,025	318	477	0,031	489	734	0,025	254	382	0,035
High-speed steels	≤ 1,200 N/mm²	10	15	530	796	0,025	318	477	0,031	489	734	0,025	254	382	0,035
Cast iron	≤ 350 HB	15	23	796	1220	0,025	477	732	0,031	734	1126	0,025	382	585	0,035
Nodular graphite and malleable iron	≤ 350 HB	15	23	796	1220	0,025	477	732	0,031	734	1126	0,025	382	585	0,035
Aluminium	≤ 600 N/mm²	35	45	1857	2388	0,027	1114	1433	0,035	1714	2204	0,027	891	1146	0,038
Thermosetting plastics		15	23	796	1220	0,027	477	732	0,035	734	1126	0,027	382	585	0,038
Thermoplastic plastics		15	23	796	1220	0,027	477	732	0,035	734	1126	0,027	382	585	0,038
Soft and light wood		21	30	1114	1592	0,03	668	955	0,038	1028	1469	0,03	535	764	0,041
Compact and hard wood		18	27	955	1433	0,03	573	859	0,036	881	1322	0,03	458	687	0,038

Key
v_c = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.

For dia. 24.0-26.5
Material designation	Tensile strength			from dia. 24.0						from dia. 26.5
				≤ dia. 12			> dia. 12			≤ dia. 12			> dia. 12
		v_c		n		f	n		f	n		f	n		f
		from	to	from	to		from	to		from	to		from	to
General structural steels	≤ 850 N/mm²	18	27	477	716	0,038	238	358	0,042	477	716	0,038	216	320	0,042
Unalloyed hardened steels	≤ 850 N/mm²	18	27	477	716	0,038	238	358	0,042	477	716	0,038	216	320	0,042
Low-alloy hardened steels	≤ 850 N/mm²	18	27	477	716	0,038	238	358	0,042	477	716	0,038	216	320	0,042
Unalloyed hardened steels	≤ 1,000 N/mm²	15	23	398	610	0,035	199	305	0,04	398	610	0,035	180	276	0,04
Low-alloy hardened steels	≤ 1,000 N/mm²	15	23	398	610	0,035	199	305	0,04	398	610	0,035	180	276	0,04
Alloyed hardened steels	≤ 1,200 N/mm²	10	15	265	398	0,035	132	199	0,04	265	398	0,035	120	180	0,04
Nitriding steels	≤ 1,200 N/mm²	10	15	265	398	0,035	132	199	0,04	265	398	0,035	120	180	0,04
Tool steels	≤ 1,200 N/mm²	10	15	265	398	0,035	132	199	0,04	265	398	0,035	120	180	0,04
High-speed steels	≤ 1,200 N/mm²	10	15	265	398	0,035	132	199	0,04	265	398	0,035	120	180	0,04
Cast iron	≤ 350 HB	15	23	398	610	0,035	199	305	0,04	398	610	0,035	180	276	0,04
Nodular graphite and malleable iron	≤ 350 HB	15	23	398	610	0,035	199	305	0,04	398	610	0,035	180	276	0,04
Aluminium	≤ 600 N/mm²	35	45	928	1194	0,038	464	597	0,042	928	1194	0,038	420	540	0,042
Thermosetting plastics		15	23	398	610	0,038	199	305	0,042	398	610	0,038	180	276	0,042
Thermoplastic plastics		15	23	398	610	0,038	199	305	0,042	398	610	0,038	180	276	0,042
Soft and light wood		21	30	557	796	0,041	278	398	0,046	557	796	0,041	252	360	0,046
Compact and hard wood		18	27	477	716	0,038	238	358	0,043	477	716	0,038	216	320	0,043

Cutting values for SMART STEP EU+ HSS DIN 338 twist drill bit
For dia. 1.0-2.5
Material designation	Tensile strength			from dia. 1.0			from dia. 2.0			from dia. 2.5
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
General structural steels	≤ 850 N/mm²	18	27	5732	8598	0,01	2866	4299	0,012	2292	3439	0,015
Unalloyed hardened steels	≤ 850 N/mm²	18	27	5732	8598	0,01	2866	4299	0,012	2292	3439	0,015
Low-alloy hardened steels	≤ 850 N/mm²	18	27	5732	8598	0,01	2866	4299	0,012	2292	3439	0,015
Unalloyed hardened steels	≤ 1,000 N/mm²	15	23	4777	7324	0,008	2388	3662	0,01	1910	2929	0,012
Low-alloy hardened steels	≤ 1,000 N/mm²	15	23	4777	7324	0,008	2388	3662	0,01	1910	2929	0,012
Alloyed hardened steels	≤ 1,200 N/mm²	10	15	3184	4777	0,008	1592	2388	0,01	1273	1910	0,012
Nitriding steels	≤ 1,200 N/mm²	10	15	3184	4777	0,008	1592	2388	0,01	1273	1910	0,012
Tool steels	≤ 1,200 N/mm²	10	15	3184	4777	0,008	1592	2388	0,01	1273	1910	0,012
High-speed steels	≤ 1,200 N/mm²	10	15	3184	4777	0,008	1592	2388	0,01	1273	1910	0,012
Cast iron	≤ 350 HB	15	23	4777	7324	0,008	2388	3662	0,01	1910	2929	0,012
Nodular graphite and malleable iron	≤ 350 HB	15	23	4777	7324	0,008	2388	3662	0,01	1910	2929	0,012
Aluminium	≤ 600 N/mm²	35	45	11146	14331	0,01	5573	7165	0,012	4458	5732	0,015
Thermosetting plastics		15	23	4777	7324	0,01	2388	3662	0,012	1910	2929	0,015
Thermoplastic plastics		15	23	4777	7324	0,01	2388	3662	0,012	1910	2929	0,015
Soft and light wood		21	30	6688	9554	0,012	3344	4777	0,014	2675	3821	0,017
Compact and hard wood		18	27	5732	8598	0,01	2866	4299	0,013	2292	3439	0,015

For dia. 6.3-8.0
Material designation	Tensile strength			from dia. 6.3			from dia. 8.0
		v_c		n		f	n		f
		from	to	from	to		from	to
General structural steels	≤ 850 N/mm²	18	27	909	1364	0,027	716	1074	0,03
Unalloyed hardened steels	≤ 850 N/mm²	18	27	909	1364	0,027	716	1074	0,03
Low-alloy hardened steels	≤ 850 N/mm²	18	27	909	1364	0,027	716	1074	0,03
Unalloyed hardened steels	≤ 1,000 N/mm²	15	23	758	1162	0,025	597	915	0,028
Low-alloy hardened steels	≤ 1,000 N/mm²	15	23	758	1162	0,025	597	915	0,028
Alloyed hardened steels	≤ 1,200 N/mm²	10	15	505	758	0,025	398	597	0,028
Nitriding steels	≤ 1,200 N/mm²	10	15	505	758	0,025	398	597	0,028
Tool steels	≤ 1,200 N/mm²	10	15	505	758	0,025	398	597	0,028
High-speed steels	≤ 1,200 N/mm²	10	15	505	758	0,025	398	597	0,028
Cast iron	≤ 350 HB	15	23	758	1162	0,025	597	915	0,028
Nodular graphite and malleable iron	≤ 350 HB	15	23	758	1162	0,025	597	915	0,028
Aluminium	≤ 600 N/mm²	35	45	1769	2274	0,027	1393	1791	0,03
Thermosetting plastics		15	23	758	1162	0,027	597	915	0,03
Thermoplastic plastics		15	23	758	1162	0,027	597	915	0,03
Soft and light wood		21	30	1061	1516	0,03	836	1194	0,033
Compact and hard wood		18	27	909	1364	0,03	716	1074	0,032

For dia. 3.15-5.0
Material designation	Tensile strength			from dia. 3.15			from dia. 4.0			from dia. 5.0
		v_c		n		f	n		f	n		f
		from	to	from	to		from	to		from	to
General structural steels	≤ 850 N/mm²	18	27	1819	2729	0,017	1433	2149	0,02	1146	1719	0,025
Unalloyed hardened steels	≤ 850 N/mm²	18	27	1819	2729	0,017	1433	2149	0,02	1146	1719	0,025
Low-alloy hardened steels	≤ 850 N/mm²	18	27	1819	2729	0,017	1433	2149	0,02	1146	1719	0,025
Unalloyed hardened steels	≤ 1,000 N/mm²	15	23	1516	2325	0,015	1194	1831	0,018	955	1464	0,021
Low-alloy hardened steels	≤ 1,000 N/mm²	15	23	1516	2325	0,015	1194	1831	0,018	955	1464	0,021
Alloyed hardened steels	≤ 1,200 N/mm²	10	15	1011	1516	0,015	796	1194	0,018	636	955	0,021
Nitriding steels	≤ 1,200 N/mm²	10	15	1011	1516	0,015	796	1194	0,018	636	955	0,021
Tool steels	≤ 1,200 N/mm²	10	15	1011	1516	0,015	796	1194	0,018	636	955	0,021
High-speed steels	≤ 1,200 N/mm²	10	15	1011	1516	0,015	796	1194	0,018	636	955	0,021
Cast iron	≤ 350 HB	15	23	1516	2325	0,015	1194	1831	0,018	955	1464	0,021
Nodular graphite and malleable iron	≤ 350 HB	15	23	1516	2325	0,015	1194	1831	0,018	955	1464	0,021
Aluminium	≤ 600 N/mm²	35	45	3538	4549	0,016	2786	3582	0,02	2229	2866	0,025
Thermosetting plastics		15	23	1516	2325	0,016	1194	1831	0,02	955	1464	0,025
Thermoplastic plastics		15	23	1516	2325	0,016	1194	1831	0,02	955	1464	0,025
Soft and light wood		21	30	2123	3033	0,018	1672	2388	0,023	1338	1910	0,028
Compact and hard wood		18	27	1819	2729	0,018	1433	2149	0,022	1146	1719	0,027

Documents

Product information

Würth Catalogue (2)

Flip Book

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents

Delivery scope

SMART STEP EU+ HSS twist drill bit assortment DIN 338 25 pieces including:

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D1,0MM

ZEBRA SMART STEP

Art.-no. 0624910100

Description:

1.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D1,5MM

ZEBRA SMART STEP

Art.-no. 0624910150

Description:

1.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D2,0MM

ZEBRA SMART STEP

Art.-no. 0624910200

Description:

2.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D2,5MM

ZEBRA SMART STEP

Art.-no. 0624910250

Description:

2.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D3,0MM

ZEBRA SMART STEP

Art.-no. 0624910300

Description:

3.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D3,5MM

ZEBRA SMART STEP

Art.-no. 0624910350

Description:

3.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D4,0MM

ZEBRA SMART STEP

Art.-no. 0624910400

Description:

4.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D4,5MM

ZEBRA SMART STEP

Art.-no. 0624910450

Description:

4.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D5,0MM

ZEBRA SMART STEP

Art.-no. 0624910500

Description:

5.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D5,5MM

ZEBRA SMART STEP

Art.-no. 0624910550

Description:

5.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D6,0MM

ZEBRA SMART STEP

Art.-no. 0624910600

Description:

6.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D6,5MM

ZEBRA SMART STEP

Art.-no. 0624910650

Description:

6.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D7,0MM

ZEBRA SMART STEP

Art.-no. 0624910700

Description:

7.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D7,5MM

ZEBRA SMART STEP

Art.-no. 0624910750

Description:

7.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D8,0MM

ZEBRA SMART STEP

Art.-no. 0624910800

Description:

8.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D8,5MM

ZEBRA SMART STEP

Art.-no. 0624910850

Description:

8.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D9,0MM

ZEBRA SMART STEP

Art.-no. 0624910900

Description:

9.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-D9,5MM

ZEBRA SMART STEP

Art.-no. 0624910950

Description:

9.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-10,0MM

ZEBRA SMART STEP

Art.-no. 0624911000

Description:

10.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-10,5MM

ZEBRA SMART STEP

Art.-no. 0624911050

Description:

10.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-12,0MM

ZEBRA SMART STEP

Art.-no. 0624911200

Description:

12.0 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-12,5MM

ZEBRA SMART STEP

Art.-no. 0624911250

Description:

12.5 mm

Quantity: 1 x

1 x

SMART STEP EU+ HSS twist drill bit DIN 338

DRL-TWST-MET-DIN338-HSS-SMARTSTEP-13,0MM

ZEBRA SMART STEP

Art.-no. 0624911300

Description:

13.0 mm

Quantity: 1 x

1 x

Empty box For DIN 338 twist drill bit

EMPTYBOX-DRILL-DIN338-(D1-13)-0,5MM

Art.-no. 0633003001

Description: Compact empty box for DIN 338 twist drill bits, compatible with the ORSY^®system

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).