RVC 50 flat roof vacuum cleaner
Wet and dry vacuum cleaner RVC 50
VACCLNR-WET/DRY-EL-RVC50
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
- Absorbed fluids are pumped out via a built-in pump with a connected ¾ inch disposal hose, allowing for continuous suction
- Coarse dirt can settle and not affect the pump as the disposal pump is not positioned on the container base
- The fill level is automatically monitored, and to ensure protection, the turbine is automatically deactivated when the maximum fluid level is reached
- Two large rear wheels and two front swivel castors allow for greater mobility and tilt protection
- Vacuum cleaner is easy to carry thanks to its low weight
- Integrated submersible pump continuously pumps out extracted liquids from the container
- For use in the case of floods, flat roof renovation, cleaning of garden ponds and pool facilities
- The pump can be completely removed and the container closed, allowing the industrial vacuum cleaner to also be used as a normal wet and dry vacuum cleaner
The device is equipped with a coarse dirt filter for wet vacuuming. If using the vacuum unit for dry vacuuming, the disposal pump must be removed, the coarse dirt filter replaced with a pleated filter and a filter bag used.
2 Years WÜRTH MASTERPLUS Warranty for wear damage
The current WÜRTH MASTERPLUS warranty conditions must be observed.
3 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Datasheets(X)
For use in the case of floods, flat roof renovation, cleaning of garden ponds and pool facilities.
Air current | 48 l/s |
Bin capacity | 50 l |
Max power | 2350 W |
Cable length | 10 m |
Min./max. frequency | 1 / 50 Hz |
Sound-pressure level | 67 dB |
IP protection class | IP 44 |
Length | 570 mm |
Width | 430 mm |
Height | 860 mm |
JNTNOZ-(F.VC-ISS-DN35)-NW35-225MM
SUCNPIP-(F.VC-ISS)-MET-NW35-550MM
ELBW-F.VC-ISS-2C-(EL-COND)-NW35
Packaging unit
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
Structure of our article number
The article number is made up of the following: VVVVAAABBBVVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Information on price display
Price per packaging unit (PU):The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Quantity
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.