Insulating and sealing primer

For detailed information, other images and documents, please select individual articles from the following table.

Insulating and sealing primer

High-quality insulating and sealing primer for indoor and outdoor applications

Chemical basis: Acrylic copolymers
Colour: White
Gloss level: Matt
Smell/fragrance: Solvent-like
Conditions for dust-drying time: at 20°C, 55% relative humidity
Conditions for being recoatable/able to be painted over: at 20°C and 55% humidity
Min. processing temperature: +8 °C
Max. processing temperature: +30 °C

Shelf life from production: 24 Month

show more ... show less ...

Available in 2 versions

Show variants

Exclusively for trade customers

Register now and access more than 125,000 products

Locate shop
Login/Register
Call customer service: +49 7940 15-2400

Report incorrect product information here

Variants

You can refine your search by selecting different attributes
Select all Reset 10 min 20 min Select all Reset 20 min 30 min Select all Reset Yes, after 2 hours Yes, after 30 minutes Select all Reset dry dry surface
Art.-no.	Dust-drying time	Grip strength	Recoatable/Can be painted over	Application conditions	Quantity	Attributes	PU	Price/PU *
0890540	10 min	20 min	Yes, after 30 minutes	dry surface		Dust-drying time 10 min Grip strength 20 min Recoatable/Can be painted over Yes, after 30 minutes Application conditions dry surface		-,--
08905401	20 min	30 min	Yes, after 2 hours	dry		Dust-drying time 20 min Grip strength 30 min Recoatable/Can be painted over Yes, after 2 hours Application conditions dry		-,--

1

* Individual prices for customers after login

Description
Usage

Description

Excellent insulating and sealing effect

Suitable for a range of critical surfaces

Compatible for use with polystyrene

Free from aromatic compounds

Saves time

Quick-drying

High coverage

High yield

Notice

If more than two coats of paint are applied and on critical surfaces, apply top coats or further insulating colour coats only after a few hours. Insufficient drying times may impair the insulation effect. With thick, slowly drying top coat systems, stains may still appear due to insulating layers being too thin or due to pore formation. For this reason, we recommend that you first test the insulation effect under the conditions present. The full insulation effect is only visible after the top coat has been applied; therefore, always test with all layers. Keep the insulating and sealing primer in a cool and dry location in its original container and make sure the container is properly sealed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Usage

Application area

Prevents critical contamination such as water streaks, nicotine, smoke stains or soot marks, coloured pencils and graffiti, among other things, from bleeding through. Suitable for use on plaster, fibre cement, concrete, wood, woodchip wallpaper and all surfaces painted white.

Suitable for use on plaster, fibre cement, concrete, wood, woodchip wallpaper and all surfaces painted white.

Instructions

The surfaces must be clean, dry and free from dust and grease. Remove all loose parts. If there are any water stains or efflorescence, thoroughly remove these impurities with a hard, dry brush. Do not apply water to clean.

Spray can:

Shake spray can well before use. Apply in thin, cross-wise moves. Let the material dry in between for maximum insulation.

Paint can:

Stir the insulating and sealing primer well before use! Do not mix or tint with other colours. Only use clean tools. Material is ready for use. It is possible to dilute with turpentine substitute or synthetic resin thinner, but this will impair the insulation effect.

For airless spraying, a nozzle size of 0.019-0.023 inch and a spraying pressure of 150-180 bar are recommended.

Services und Systeme rund ums Produkt