Pressure plate for tension anchor HTA
Tension anchor plate, HTA
TENSANCPLT-F.AIRTGT-HTA-58,5X50X10MM
-,--
price per selected packing unit | Individual prices for customers after login
price per selected packing unit | Individual prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7940 15-2400.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
To increase the tension resistance of tension anchor HTA
- Steel plate galvanised on all sides (S355 MC + Fe Zn 12c) as per EN 10025-2:2004
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
Proof of Performance
CE labelling as per European Technical Approval ETA-14/0274
| Notes: |
| Würth anchor nails or ASSY 3.0 joist hanger screws according to EN 14592 or ETA 11/0190 are to be used as fasteners. The specified load-bearing capacities are for softwood with a characteristic density of ρk ≥ 350 kg/m³. Design value of the load-bearing capacity of a fastener: FVM,Rd = kmod/gM = F1,Rk with gM = 1.3 Design value of the steel load-bearing capacity of the tension anchor: FS,Rd = FS,Rk/gM2 with gM2 = 1.25 Design value of the total load-bearing capacity: F1,Rd = min {n x FVM,Rd; FS,Rd} with n = number of nails The design value of the tensile force in the anchor bolt FB,Ed is to be calculated with the design value of the tensile force of a tension anchor FEd. The minimum distances between fasteners for sheet steel-wood connections according to EN 1995-1-1 must be observed. The specified values given were calculated on the assumption of an immovable intermediate layer according to Blass and Laskewitz "Load-bearing capacity of connections with pin-shaped fasteners and intermediate layers". |
CE labelling as per European Technical Approval ETA-14/0274
Product information
Datasheets(X)
Application area
For increasing the tension resistance of tension anchor HTA for anchoring supports, roof beams, timber frame constructions or solid wood elements.
 | |
Length x width x height | 58.5 x 50 x 10 mm |
Diameter of hole | 17 mm |
Number of holes | 1 PCS |
Weight | 200 g |
Surface | Zinc plated |
Material | Steel / steel |
Material standard | EN 10025- 2:2004 |
Approval | ETA-14/0274 |
| Calculation of the load-bearing capacities of fasteners according to DIN EN 1995-1-1 as for thick steel sheets. The required minimum distances between the fasteners must be observed! The specifications are valid for a characteristic density ρk = 350 kg/m³ and for kmod = 0.9. |
| Tensile force in anchor bolt: FB,Ed = kt x FEd | ||||||||||||
| Tensile force in anchor bolt: FB,Ed = kt x FEd | ||||||||||||
| Tensile force in anchor bolt: FB,Ed = kt x FEd | ||||||||||||