Nail HN 101 For use in steel and concrete substrates
Nail HN 101
NL-HN101-27MM
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Nails with shaft lengths of 72, 90 and 100 mm must be pre-tapped into place with a hammer. Please observe the corresponding device category when selecting your fasteners
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shaft length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
High-quality nail for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Design | Smooth |
Head type | Step head |
Shaft length (SL) | 27 mm |
Length (L) | 27 mm |
Shank diameter (Øds) | 3.7 mm |
Head diameter (Ø dk) | 8 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Datasheets (0)
Cartridge KFTZ 11A CE With 10 cartridges per magazine strip
Collated nail UMA 221/10
Nail UNS 104 In accordance with DIN EN 206
Pin driver BST 350
Wire nail DIN 1151, steel, plain
34° half-head collated nails AN
Nail HNS 103/18 In accordance with DIN EN 206
Collated nails and gas cartridge NG CS-2/3 HFB
Manual drive-in stud With large collar
Collated formwork nail SMA 116/10
Cover/construction film
Round-head nail NK 700 With steel washer
Nail HNS 107/30 In accordance with DIN EN 206
Cutting disc Speed for steel
Formwork nail SN 105 With intended rupture point
Fabric adhesive tape
ASSY® 3.0 zinc-plated yellow chipboard screw
ASSY® 3.0 SK timber screw
ASSY® 3.0 zinc-plated blue chipboard screw
PURlogic® Top single-component gun foam
Snap-off blade
Basic builder's bucket With zinc-plated handle
1C foam gun PURlogic® Xpress For professional application of 1-component gun foams
Building marker
PU foam cleaner PURlogic® Clean
High Power battery
Twist drill bit HSS DIN 338 type RN 118°
Silicone acetate bathroom unit
Hammer drill bit Plus Duo-S Vario
Angle bracket type A
