When you view and play embedded videos on https://www.wuerth.de, the provider youtube may be able to store your access and analyze your behavior. If you activate the content, i.e. agree to view and play it, a cookie is placed on your computer to record that you have agreed to this in your browser. This cookie does not store any personal data.
You can also use this link to access the video directly on the plattform of the provider: https://youtu.be/yThOFsAifvM
Medium-strength screw retainer
Prices for customers after login
Register now and access more than 125,000 products
Produces medium-strength connection
Can be removed using normal tools
Can also be applied to stainless steel and passivated surfaces
No "accelerator" or "activator" required
Excellent media and thermal stability
Universal products with a wide range of application
Prevents detachment, e.g. through vibration and shock loads
No unwanted attachment problems such as with mechanical screw fixings
Resistant to a large number of bases, gases, solvents, oils and fuels
One hand always remains free.
Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.
Costs optimised thanks to emptying with virtually no remaining product
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre and painted surfaces. We always recommend that you conduct your own tests.
NSF-tested in accordance with ANSI 61, DVGW (German association of gas and water) (DIN EN 751-1)
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Automotive and commercial vehicle industry, metal and tool manufacturing, shipbuilding, machine and engine construction, electrical and electronics construction
The surface must be free of oil, grease and other contaminants. The best adhesive results are achieved by first cleaning with metal cleaner 7063. Observe the flash-off times!
For blind holes, apply several drops inside along the thread up to the base of the hole. For through holes, apply several drops to the point on the screw where the nut will sit. In sealing applications, apply the product around the outer thread. The mid-strength screw retainer cures anaerobically, meaning that it only hardens where the adhesive has no contact with atmospheric oxygen. At the same time, the hardening speed continues to be influenced by the catalytic effect of metal and the gap width. Excessive adhesive that is pressed out of the gap between the two parts will not harden and can be removed with a dry cloth or a cloth saturated with acetone cleaner.
Passive materials: nickel, zinc, tin, precious metals, aluminium with minimal copper and/or manganese content, high-alloy steel, oxide or chromate coats, plastic, glass and ceramic.
Dimethacrylic acid ester
Min./max. viscosity 1
Conditions for viscosity 1
at 25°C, Brookfield RVT, spindle 3/2.5 rpm
Min./max. viscosity 2
Conditions for viscosity 2
at 25°C, Brookfield RVT, spindle 3/2.0 rpm
Max. gap-filling ability
Min. flashing point
Min./max. initial strength
Min./max. final strength
1 h-3 h
Min./max. functional strength
Min./max. compressive shearing strength /conditions
12-20 N/mm² / in accordance with DIN 54452
Compressive shearing strength conditions
in accordance with DIN 54452
Min. breakaway torque
Min. prevail torque
Min./max. temperature conditions
-55 to 150 °C
Min./max. processing temperature
5 to 35 °C
Shelf life from production
Conditions to maintain shelf life from production
at room temperature
Weight of content
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!