Machine setting tool
MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)
Art.-no. 0904908016
EAN 4049557418636
-,--
price per selected packing unit | Individual prices for customers after login
price per selected packing unit | Individual prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +49 7940 15-2400.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For quick and convenient driving in of WÜRTH Fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a rotary hammer drill
Easy handling with the standard SDS-plus drive arbor
Suitable for all WÜRTH rotary hammer drill with SDS-plus drive arbor
- Particularly suitable for economical series installation
- Optimal and even power transmission - therefore low manual insertion energy
- Clean, centred dowel insertion - due to the tapered drive optimally matched to the Fixanchor angle connector
- Shorter insertion time
- Also ideal for overhead mounting and for difficult-to-access fastenings (e.g. railings/pipe suspensions)
- High-quality steel ensures a long service life
Create the drill hole
10
Knock in anchor with mason's mallet or machine setting tool
Set anchor in place
Apply torque
| Usable anchors | ||
| Product description | Designation | Dimensions |
| 02.5 | Fixing bolt anchor W-FAZ/S | M8 - M16 |
| 02.6 | Fixing bolt anchor W-FAZ/A4 | M8 - M16 |
| 11.1 | Fixing bolt anchor W-FA/S | M8 - M16 |
| 11.1 | Fixing bolt anchor W-FA/hot-dip galvanized | M8 - M16 |
| 11.2 | Fixing bolt anchor W-FA/A4 | M8 - M16 |
| HCR anchors available by special order | ||
Product information
Datasheets(X)
Application area
- Can be used for anchor sizes M8 to M16
- Mount setting tool on Würth hammer drill with SDS-plus drive arbor
- Place setting tool mount on fixing bolt anchor thread and mechanically insert anchor into pre-drilled and cleaned drill hole
- Fix anchor by applying specified torque with torque spanner (see anchor product information)
Suitable for anchor diameter | 8 mm, 10 mm, 12 mm, 16 mm |