MFD-S multi-purpose drill bit, 1/4-inch hexagonal shank
MFD-S multi-purpose drill bit, hexagon shank
DRL-GENPURP-MFDS-HEX-E-D6-L100-WL54MM
ZEBRA
price per selected packing unit | Individual prices for customers after login
Register now and access more than 125,000 products
The products shown are not necessarily compatible. Please always check the articles for the respective application purpose.
Extra-sharp cemented carbide cutting edges with special diamond grinding on all sides
- Clean and precise holes, even when drilling through several different materials in one hole
- Very suitable for universal use
- Shatter-proof drilling of hollow-chamber bricks
- Highly accurate spot drilling
- Outstanding drilling results in metal
Outstanding, rapid transport of drilling dust
- Special surface treatment
- Patented four-step profile
Standard 1/4-inch hex. shank
- No slippage in the drill chuck
- Suitable for any bit holder
PGM tested
Suitable for drilling holes intended for anchor connections that are subject to approval.
Not suitable for impact drilling. For rotary drilling only!
- Rotary drilling in tiles, solid brick, roofing tiles, hollow brick, stone, marble, wood, plastic, metal etc.
- Window installation, drilling through formwork and drilling through hollow-chamber bricks without breakage for a secure anchor hold etc.
Diameter (Ø) | 6 mm |
Length | 100 mm |
Working length | 54 mm |
Versatility (points system) | 4 of 4 points |
Service life (points system) | 3 of 4 points |
Drilling speed (point system) | 4 of 4 points |
Bore hole quality (point system) | 4 of 4 points |
Tool holding device | Hexagon |
Datasheets (0)
Certificates/ Documents (0)
MFD-S multi-purpose drill bit with straight shank
Multi-purpose drill bit Multipack MFD-S 1/4 inch hex shank, 6 pieces
Multi-purpose drill bit MFD-S Plus
Roof tile drill bit
Nylon anchor For light loads (secondary attachments)
DUO-S impact drill bit, 1/4-inch hexagonal shank
Brick and tile drill bit
DUO-S impact drill bit with straight shank
Multi-purpose drill bit MFD-S 3-face shank
Cable tie KBL 1 made of polyamide with plastic tongue
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Snap-off blade
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, zinc-plated, blue passivated (A2K)
Multipack of multi-purpose drill bits MFD-S straight shank, 5 pieces
Diamond tile dry core bit, 1/4-inch hexagonal shank
High Power battery
Crimp cable lug, push connector, fully insulated PVC-insulated
Electrical insulating tape
Assembly glove Soft
Twist drill bit HSS DIN 338 type RN 118°
Klebfix superglue
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
Twist drill bit HSCo DIN 338 type RN oxide
Industry Clean cleaner
Silicone spray
Refuse bag Without pull tie
Brake cleaner
Crimp cable lug, round connector PVC-insulated
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Adhesive lubricant HHS® 500
